upholstery shop recommendations [merged]

[boybi]

i'm going to replace my seat covers, and don't have time to look around different shops since i'm not based in metro manila. i only have time to go to one shop only to select a color and design. so i'm relying on tsikoteers' experience with the seat cover makers, on which one is better. i narrowed it down to the following shops based on the different threads about leatherette seat covers:

1. SeatMate
2. Boy Chingcuanco
3. Coventry
4. SeatPro

[ssaloon]

gamit ko seat covers by boy c. ayos ang gawa, parang leather talaga ang dating. di rin siya kumukulobot tulad ng mga nabibili sa mga hardware stores.

[boybi]

how much pagawa mo miko? meron kang contact number ni boy c?

[woodfire]

Boy C. mas higher end ang market. Pag mid-end, okay na rin yung Conventry Square.

Personally, I'll go for Boy C.

[ssaloon]

5500 gastos ko para sa galant. 4500 regular lang, add 1000 para may clips sa seats mismo para very snug fit.

[chieffy]

halos lahat yata gumagawa ngayon gumagamit na ng clip...for my civic sa Seatpro ako kumuha...maganda naman gawa nila...di ko matandaan kung 3500 or 4500 kuha ko...

[boybi]

pati pala center console pwede palagyan ng leather.

baka mag Boy C. nalang ako, wala ba talagang nakakaalam ng contact number ng Boy C.?

[chieffy]

mas magaling gawa ng Autoblaze General Merchandise 8216596(Pque.) sa seatcover sa mazda 3 ko....fit na fit rin at after a year di pa rin gumagalaw kahit walang clip...yung headrest di halatang naka seatcover lang (may velcro)



yan dami ka na choices boybi

[number001]

What material was used? Vinyl?

I bought some korean-made after market seat cover (non-customized) about 8 years ago and it started peeling all over after just two years of use.

[zechs]

ok yung pinost ni chieffy sa mazda 3 nya. medyo malayo lang nga. leatherette ba yan? or leather na talaga?

[boybi]

masyado ng malayo ang paranaque sa akin. pero ang ganda nga ng pagkakagawa at pagkakabit sa seat cover ng m3 mo.

[chieffy]

number001 yung "korea" na leatherette ang pinakamadaling masira...

zech, leatherette...

boybi mganda rin ang gawa ng Equipt check out this thread
(you must sign up first)

[boybi]

nagpunta na ako kay Boy C. kanina. hehe, komedyante pala si Boy C.

nagpagawa ako ng seat covers for Patrol and Previa. nagpagawa rin ako ng matting for Previa.

[papao]

how much un inabot ng seat cover ng patrol kay boy c?

[aann]

mas magaling gawa ng Autoblaze General Merchandise 8216596(Pque.) sa seatcover sa mazda 3 ko....fit na fit rin at after a year di pa rin gumagalaw kahit walang clip...yung headrest di halatang naka seatcover lang (may velcro)



yan dami ka na choices boybi

sir magkano yng pagawa dyan sa paranaque? at san banda yan?

thanks!

[nightrider]

sir magkano yng pagawa dyan sa paranaque? at san banda yan?

thanks!

ganda nito a!san banda sa Paranaque ung gumawa nito?kung cno man ung owner pls paki-post nman ung address or contact info,salamat

[theveed]

Nagpabalot ako ng shifter ng benz ko dati sa coventry, ok naman, although a year or so medyo nakakalbo na yung pattern ng leather... not their fault though, sumasayad lang lagi singsing ko sa shifter...

[Jiggs]

My vote goes for Seatmate...galeng ng mga gawa nila, I had my CRV steering wheel covered with a genuine leather and have my driver seat installed an armrest...while I was with the shop ang gaganda din ng mga works nila for Innova and Fortuner..and the new Hi ACE...they could make ur entry level hi-ace van turned to a luxurious Van. with power seat and a rotating captain seat..ang galing.

[tebs]

how much did it cost for the armrest? and how did they do it?

haven't got any experience in upholstery department of our vehicles. coz we really don't mod out our cars. hehehe

[Jiggs]

I think it's Php 1,500.00 for the armrest and Php1,800 for the steering wheel cover...the driver seat was removed then they bolt on the armrest with the matching finish of your choice. 3 hrs lang tapos na.