Results 11 to 20 of 28
-
-
April 19th, 2011 09:50 PM #12
For me naman i follow the manufacturer's recommended tire pressure. tested na kasi sa plant nila bago sila mag mass productıon.
Pero na sa inyo na rin kung saan ba comfortable and kung ok ba. different people
different taste..
-
April 19th, 2011 11:47 PM #13
Recommended psi is at 35. Sometimes top up at 36psi para masmatagal yun "reair" intervals ko.
Gaano ba ka-dangerous (I mean in terms of tire wear) if I inflate it at 40psi?
-
Tsikoteer
- Join Date
- Mar 2008
- Posts
- 52,727
April 19th, 2011 11:55 PM #14adding 10% to the recommended tire pressure is usually ok. any more than that, and you risk premature tire failure (oblong). but i would not expect dramatic FC improvement just by over-inflating my tires.
-
-
-
April 20th, 2011 02:45 AM #17
I follow the recommended 28 psi for my tires. But I inflate them at Cold temp early in the morning. Cause when the tires heat up, I think they'll add-up around 2-3 psi from the cold temp inflation so thats running at around 30-31 psi.
If the tires are over inflated you'll have uneven wear especially on the inner thread section. Save Gas, wear the tires...
-
Verified Tsikot Member
- Join Date
- Aug 2004
- Posts
- 184
April 20th, 2011 12:28 PM #18
-
April 20th, 2011 02:06 PM #19
Drivers door jamb label says 28-32 PSI, I inflate my tire to 34
I saw sign of outer wear and tear kasi
-
Verified Tsikot Member
- Join Date
- May 2011
- Posts
- 108
July 31st, 2011 04:43 PM #20what about sa tucson ix? right now im using 30 (front) 30 (back) is that okay?
I thought there's only one belt. akala ko drive and timing is the same. Thank you
Toyota Innova Owners & Discussions [continued...