2008 Hyundai Starex (Gen. 4)

[CVT]

Yan mod ba is to prevent the door sticking? Ok naman oag bukas ng sliding pero maganda kung makatulong iton mod ma preserve yun mechanism.

Ang hina palan ng foglights. 27watts parang Drl.

Yes they are, and their position is very low to make an impact. So, basically, just position lights.

That is why I just changed them to yellow color...

The same with my high beam headlights....

[mda]

One important tip that i got from the FB group. Kung matigas buksan ang sliding doors, most likely dumidikit ang stock rubber stoppers that are on the top edge of the doors to the metal.
Need to place new rubbers by using rubber stoppers for chairs from ace hardware, diy shop etc. 25 pesos lang.
Madali na sya buksan. Hindi na mapuputol ang door handle. Mine broke off early this year.
Here's what i bought from ace. Size 3/4. Need to trim a bit para flush fit over the old stopper




Sent from my iPhone using Tapatalk

Could you take a picture of this sa actual door sir?

Thanks!

[CVT]

One important tip that i got from the FB group. Kung matigas buksan ang sliding doors, most likely dumidikit ang stock rubber stoppers that are on the top edge of the doors to the metal.
Need to place new rubbers by using rubber stoppers for chairs from ace hardware, diy shop etc. 25 pesos lang.
Madali na sya buksan. Hindi na mapuputol ang door handle. Mine broke off early this year.
Here's what i bought from ace. Size 3/4. Need to trim a bit para flush fit over the old stopper




Sent from my iPhone using Tapatalk

Thanks for sharing bro.

Maybe I'll try this too.

We usually "unclip" both sliding doors using the handle, and pull it through the side body of the sliding door...

[mda]

Found a different one, mas malaki kesa sa pinakita nyo sa picture, pero 3/4 parin yung size.

Ni shoot ko lang on top of the existing rubber stopper, maayos na. Less than a minute job hehe.

Thanks! Ganda ng pagkabukas ng pintuan.

[CVT]

One important tip that i got from the FB group. Kung matigas buksan ang sliding doors, most likely dumidikit ang stock rubber stoppers that are on the top edge of the doors to the metal.
Need to place new rubbers by using rubber stoppers for chairs from ace hardware, diy shop etc. 25 pesos lang.
Madali na sya buksan. Hindi na mapuputol ang door handle. Mine broke off early this year.
Here's what i bought from ace. Size 3/4. Need to trim a bit para flush fit over the old stopper




Sent from my iPhone using Tapatalk

Checked out ACE HW in South Mall a few days ago... No more 3/4... Only 5/8 and 1/2...

Mukhang inubos na....��

[JJB]

Checked out ACE HW in South Mall a few days ago... No more 3/4... Only 5/8 and 1/2...

Mukhang inubos na....��

Other hardware stores should have them. DIY, true value etc.
Ganda na talaga pagbukas ng sliding door, may pitik na at wala nang dumidikit


Sent from my iPhone using Tapatalk

[jaggerx3]

Other hardware stores should have them. DIY, true value etc.
Ganda na talaga pagbukas ng sliding door, may pitik na at wala nang dumidikit


Sent from my iPhone using Tapatalk

Pano mo naipasok ung rubber na bago?

Sent from my SM-J730G using Tapatalk

[mda]

Pano mo naipasok ung rubber na bago?

Sent from my SM-J730G using Tapatalk

Shoot mo lang on top of the old rubber stopper

[benchph1]

Tried to clean the paper cabin filters yesterday. I usually wack it on the wall to get rid of the dust. Integral na pala yung filter sa casing so i ended up breaking the plastic casing. Lol. Leason learned.


Sent from my iPhone using Tapatalk

[JJB]

Here you go...





Sent from my iPhone using Tapatalk

[mda]

Here you go...

Sent from my iPhone using Tapatalk

Big thanks!

Off to the hardware store tomorrow!

[benchph1]

Talking about sliding doors, main source ng kalampag sa GS namin yan. Parang malalaglag kapag nalulubak.

Did some observation and found out that this is one of the noisiest. The sliding door lock tab. Tried to stuff it with foam and medyo nawala. Eventually matatanggal din yung foam kaya maingay na uli




Sent from my iPhone using Tapatalk

[JJB]

Yup nakakahinayang bumili ng bnew GS then sa laki nya, parating may gasgas or tama from public parking. Mas lalo kung driver lang gagamit parati


Sent from my iPhone using Tapatalk

[spat]

Mga boss, anong size ng wiper ng grand starex natin? Kahit na anong klaseng wiper ba?

Thanks in advance.

[JJB]

Mga boss, anong size ng wiper ng grand starex natin? Kahit na anong klaseng wiper ba?

Thanks in advance.

Size is 26 and 20 iirc. Any brand will do


Sent from my iPhone using Tapatalk

[dct]

Size is 26 and 20 iirc. Any brand will do


Sent from my iPhone using Tapatalk

24-20 ata ang stock? Walang sabit 26-20?

Sent from my SM-A9000 using Tapatalk

[yebo]

24-20 ata ang stock? Walang sabit 26-20?

Sent from my SM-A9000 using Tapatalk

walang sabit yan. i even used 26/22 on my gs before.

[benchph1]

For me, i just get those decent wiper brands na hindi naman sobrang mahal like bosch. And just in case i park outdoors i lift up the wipers to prevent the rubber from being cooked by the sun.

I will try LED headlights in my low beams. Will let you guys know the results.


Sent from my iPhone using Tapatalk

[StockEngine]

24 Oras: Van na nag-overheat, nagbuga ng makapal na usok sa NLEX - YouTube

Sent from my SM-G935F using Tsikot Forums mobile app

[JJB]

24 Oras: Van na nag-overheat, nagbuga ng makapal na usok sa NLEX - YouTube

Sent from my SM-G935F using Tsikot Forums mobile app

Saw that news also.
Meron pa kaming 1999 na starex millennium gold. Ok pa naman takbo. Sana wag masunog. hahaha



Sent from my iPhone using Tapatalk