Honda esi major major white smoke

[GreenGiraffe]

I'm a newbie, I really need help. I had my first car more than year ago, 1995 esi matic. Kainis kc lagi nlang may lumalabas na bagong sira at lumampas na sa price ng bili ko sa car yung nga2stos ko just trying to keep it in running condition. Recently naputulan ako ng crankshaft so what my mechanic(already done an overhaul job last year, "overheat") did was to replace it with a surplus(total costs for the job, 35K). Tried nmin ibalik kc may backjob, mausok. But mechanic is asking for more money. Grrrr... so went to another mechanic for a 2nd opinion, kya daw mausok maluwag na daw yung 2 butas ng block, di na daw fit sa piston.

I would appreciate your help and suggestions. Thanks in advance.

[aejhayl17]

you should have opt out for a surplus engine replacement in the first place. imho.

you should have compared first the cost of overhauling or replacing the engine.

[GreenGiraffe]

If could only turn back time so I guess that's the last best resort. Anyway, in case umabot sa ganon, where can I get a good engine replacement and how do I get about the registration with the new engine number if it's from another car?

[bong06]

check this link bro, my mechanic mel casaba fr cavite honda specialist at a lesser cost, guaranteed !!!!

http://www.sulit.com.ph/index.php/vi...alist#m3120950

[GreenGiraffe]

Thanks bong06, I'm not sure if my car could make it all the way there. I hope there is someone nearby QC you can refer me to.

[ben_david19]

white smoke means you're burning coolant. in short head gasket ang malamang na culprit.

[bong06]

Thanks bong06, I'm not sure if my car could make it all the way there. I hope there is someone nearby QC you can refer me to.

bro, marami shop dyan, pero sa kanya din gagawin, you would'nt believe, marami sya consignment from shops all over metro manila, kung baga mag aahente lang sila, just call him, baka pwede ka nya service, thanks.

[robot.sonic]

I'm a newbie, I really need help. I had my first car more than year ago, 1995 esi matic. Kainis kc lagi nlang may lumalabas na bagong sira at lumampas na sa price ng bili ko sa car yung nga2stos ko just trying to keep it in running condition. Recently naputulan ako ng crankshaft so what my mechanic(already done an overhaul job last year, "overheat") did was to replace it with a surplus(total costs for the job, 35K). Tried nmin ibalik kc may backjob, mausok. But mechanic is asking for more money. Grrrr... so went to another mechanic for a 2nd opinion, kya daw mausok maluwag na daw yung 2 butas ng block, di na daw fit sa piston.

I would appreciate your help and suggestions. Thanks in advance.

Bro, iwas sa text speak. Baka magalit si mod.

[voltscastillo]

headgasket or cracked cylinder head OR something as simple as worn valve stem seals (400 yata ito isa, or for 4 na).

if i were you, wag ka na bumalik sa mekaniko mo. dalhin mo sa specialists kasi hindi owner type jeep yan kahit sinong mekaniko pede gawin.

kung block/pistons/headgasket problema, much better pa na bumili ng surplus na makina. mura lang makina ng honda na maliit... d15b costs about 30K and its a straight swap.

pwede yung makina ng VTI or LXI jan. BASTA SPECIALIST ang babanat. madami talyer dito na recommended, basa-basa ka lang. wag sa gumagawa ng FX or owner, bibirotyahin lang nila yan.

[jaypee10]

I'm a newbie, I really need help. I had my first car more than year ago, 1995 esi matic. Kainis kc lagi nlang may lumalabas na bagong sira at lumampas na sa price ng bili ko sa car yung nga2stos ko just trying to keep it in running condition. Recently naputulan ako ng crankshaft so what my mechanic(already done an overhaul job last year, "overheat") did was to replace it with a surplus(total costs for the job, 35K). Tried nmin ibalik kc may backjob, mausok. But mechanic is asking for more money. Grrrr... so went to another mechanic for a 2nd opinion, kya daw mausok maluwag na daw yung 2 butas ng block, di na daw fit sa piston.

I would appreciate your help and suggestions. Thanks in advance.

nagkaroon npo ako ng esi 95model po na all power sus maryosep po ang nging gastos ko po sa esi ko.unang bili ko. unang pinagawa ko nmatay ung isang butas.cost ant labor total 8k.tapos after ng 2months.nagpalit ako ng mga suspension bushing napakatakaw sa bushing ng esi palaging kailangang camber at allinement.sus.tapos after umusok sya ng puting puti tapos kain ng langis.sabi ng mechaniko piston ring daw over hall.pinagawa ko ulit.gastos ako ng 28k lahat after ng 6 months nag oover heat ulit sya palit ako ng new radiator nag ok nman sa ng isang buwan pagkatapos bumigay ulit sya.sira daw ung cylinder head palit ako ng cylinderhead surplus.cost ng 18k.napagod ako kakapagawa.binenta ko nlang ito tapos pinalitan ko ng 96 vtech honda di gang ngayon 1 year na wala pako pinaayos.sakit talaga sa ulo ung honda esi...

[ghosthunter]

I'm a newbie, I really need help. I had my first car more than year ago, 1995 esi matic. Kainis kc lagi nlang may lumalabas na bagong sira at lumampas na sa price ng bili ko sa car yung nga2stos ko just trying to keep it in running condition. Recently naputulan ako ng crankshaft so what my mechanic(already done an overhaul job last year, "overheat") did was to replace it with a surplus(total costs for the job, 35K). Tried nmin ibalik kc may backjob, mausok. But mechanic is asking for more money. Grrrr... so went to another mechanic for a 2nd opinion, kya daw mausok maluwag na daw yung 2 butas ng block, di na daw fit sa piston.

I would appreciate your help and suggestions. Thanks in advance.

[SIZE="4"]REMINDER: do not post messages in SMS/TXT shortcut format.

Read the RULES.

Ignorance is NOT an excuse.

Repeated offenses will lead to banning.[/SIZE]

[ghosthunter]

I'm a newbie, I really need help. I had my first car more than year ago, 1995 esi matic. Kainis kc lagi nlang may lumalabas na bagong sira at lumampas na sa price ng bili ko sa car yung nga2stos ko just trying to keep it in running condition. Recently naputulan ako ng crankshaft so what my mechanic(already done an overhaul job last year, "overheat") did was to replace it with a surplus(total costs for the job, 35K). Tried nmin ibalik kc may backjob, mausok. But mechanic is asking for more money. Grrrr... so went to another mechanic for a 2nd opinion, kya daw mausok maluwag na daw yung 2 butas ng block, di na daw fit sa piston.

I would appreciate your help and suggestions. Thanks in advance.

For the money, you might as well replace the entire original engine with a surplus engine. It is also possible to get a local engine which was removed because the original owner get a more powerful engine to swap with his.

I can suggest SPEEDLAB to help you.

http://www.speedlab.com.ph/contact.php

.