Hi all,

I'm new here. For the past months I've been reading different forums here coz they're quite good. Today I decided to join because i wanted to ask and get some tips and share some experience as well.

I had my car tinted in banawe 2 days ago( front windshield -1 pc. 3M magic neutral, rest 3M dark magic). Today I noticed there is a small (about 1 cm or so) bubble-like spot in the center of the windshield (filled with white liquid & air(?)) and another spot where a small black dirt got trapped between the tint and the glass.

I went back today and showed the problem to the person who installed it. He said : "Bilad niyo pa sa araw, mawawala din yun basa sa loob at didikit din" and "Hindi talga minsan maiwasan malagyan ng dumi pag dikit". And "Hindi magkaka problema yan, pinapalitan usually yung may bubble sa gilid".

So, I'm planning to wait a few more days to see what happens. But I'd like to ask you if what he said was true and if that is acceptable. And also, if I pursue to ask them to re-tint my windshield (as a back-job, free of charge), are those 2 spots enough to qualify it as a back-job? I found scratches and small "tupi", but they are not on center, so i mind it less.

The shop is one of the well-know ones in banawe(based on threads here)and i find the tinting, average-good in general, except ofcourse on my windshield.

Any tips/recommendations? Thanks in advance.