Results 1 to 10 of 14
-
Verified Tsikot Member
- Join Date
- Jun 2012
- Posts
- 7
June 26th, 2012 12:10 PM #1good daY to all. im new here. im planning to get a ford ranger, but im not sure about its maintenance cost. is it really costly to own a ford? how about the parts. i need your advice. thanks a lot.
-
June 26th, 2012 12:17 PM #2
That shares mechanicals with a Mazda truck. It is a Mazda designed truck after all. Parts shouldn't be that pricey.
-
June 26th, 2012 12:43 PM #3
Parts for American-made Fords are harder to source, though not really more costly (For example, a MAF for a Triton V8 isn't much more than a MAF for a japanese car)... whereas parts for Asian Fords, which have a lot in common with Mazdas... are not hard to get.
Ang pagbalik ng comeback...
-
Verified Tsikot Member
- Join Date
- Jun 2012
- Posts
- 7
-
June 26th, 2012 12:55 PM #5
-
Verified Tsikot Member
- Join Date
- Jun 2012
- Posts
- 7
June 26th, 2012 02:00 PM #6thanks for all those inputs. really appreciate them! so it means that the parts are not that expensive. how about the maintenance? sorry... dont know much about cars.
-
-
June 26th, 2012 04:11 PM #8
No.
The only modern CBU from North America Fords officially sold here were the Expedition, Explorer, Explorer Sport Trac, E-150 Club Wagon, F-150 and Lincoln Town Car.
These are the following CBU from North America Ford models in the current local lineup:
Expedition
Explorer
E-150 Club Wagon
2013 Mustang (to be launched in July)
-----------------------------------------------------------------------------------------------------------------
ASEAN made models:
The Ford Escape was a Ford-Mazda joint venture, ASEAN version is made in the Philippines
The Ford Lynx is a rebadged Mazda Protege aka Familia, ASEAN version was made in the Philippines
ASEAN Ford Ranger (previous models) is a rebadged Mazda BT-50, made in Thailand
The Ford Everest is based on the Ranger/ Mazda BT-50 chassis, made in Thailand
The Ford Fiesta was designed by Ford of Europe, ASEAN version is made in Thailand
The previous gen Ford Focus Mk2 was designed/developed by Ford of Europe, ASEAN version is made in the Philippines
The new 2012 Ford Focus Mk3 was designed/developed by Ford of Europe, ASEAN version is made in Thailand
The new 2012 Ford Ranger (T6) was designed/developed by Ford Australia, ASEAN version is made in ThailandLast edited by AG4; June 26th, 2012 at 04:27 PM.
-
Verified Tsikot Member
- Join Date
- Jun 2012
- Posts
- 7
June 26th, 2012 07:39 PM #9so more or less, maintenance is equal or just a bit expensive when compared to asian vehicles?
-
Verified Tsikot Member
- Join Date
- Jun 2012
- Posts
- 7
June 26th, 2012 07:42 PM #10
Choice I would have made as well.:nod:
2024 Innova Zenix 2.0 V CVT (non-HEV) vs Innova...