Results 1 to 6 of 6
-
Tsikot Member
- Join Date
- May 2012
- Posts
- 2
May 19th, 2012 12:00 PM #1guys im a new member here..
tanong ko lng sna kung tama b ung item price and labor cost, ung ford lynx ko kc may leak sa crankshaft oil seal..
ang price nila for crankshaft oil seal is 1200, original nman daw.
tpos labor cost is 3000..
reasonable ba ung pricing nila??
pxenxa na, new car owner ako..
tnong ko n din kung required b plitan ung timing belt and bearring kpag pnalitan ung oil seal, cnsv kc nila kailngan dw plitan..
thanks...
-
May 19th, 2012 12:10 PM #2
REMINDER: do not post messages in SMS/TXT shortcut format & grammar. Use proper sentenses and paragraph construction. If your posted message is hard to read, less people will read it & respond.
Read the RULES.
Ignorance is NOT an excuse.
Repeated offenses will lead to banning.
-
Tsikot Member
- Join Date
- May 2012
- Posts
- 2
May 19th, 2012 12:17 PM #3guys im a new member here..
tanong ko lng sana kung tama ba yung item price and labor cost, yung ford lynx ko kasi may leak sa crankshaft oil seal..
ang price nila for crankshaft oil seal is 1200, original nman daw.
tapos labor cost is 3000..
reasonable ba ung pricing nila??
pasensya na, new car owner ako..
tanong ko na din kung required b plitan yung timing belt and bearring kapag pinalitan yung oil seal, sinasabi kasi nila kailangan daw palitan..
thanks...
-
May 19th, 2012 01:17 PM #4
mahal ang labor cost kung oil seal lang ang papalitan.
are you refering to fan belt instead of timing belt and idler bearing? Fan belt palitan kung meron ng signs of crack.
idler bearing kung maingay na, palitan na din. if it's timing belt, there's a corresponding mileage for replacement.
I change every 100K kms traveled.
-
- Join Date
- Dec 2002
- Posts
- 2,335
May 19th, 2012 01:32 PM #5This is oil seal for the crankshaft. Depends how many hours gagawin. For some cars kayang dukutin, for some mas matagal. If it's an 8hr job then 2.5-3k is ok kung pulido yung work.
timing belt/bearing: depends sa instructions sa manual mo but definitely before 100k km you need to change those plus your water pump.
Isang side kasi ng makina yan kaya they are suggesting it assuming they are not pulling your leg or anything
-
Verified Tsikot Member
- Join Date
- Oct 2011
- Posts
- 26
May 23rd, 2012 12:06 AM #6Try calling a this ford guy, he can source out parts and might even charge you cheap on labor.09224456673. Tell him reffered by angelo.
Hope this helps.
3M Color Stable series are all above 50% TSER. RFID readable through the tint, stays good for...
What's the best car tint brand and color?