When should the MAF sensor be cleaned?

**SidCoronel** · June 9th, 2019 01:20 PM

Originally Posted by sirkosero

On my vios, whenever i feel lile it. Minsan i clean every month. Minsan every 6 months. Minsan, every saturday morning. Super dali lang naman

I do it when im bored.

Sent from my MI MAX 2 using Tapatalk

I've plenty of TBs to clean, are you bored now?

**baludoy** · June 9th, 2019 05:48 PM

Originally Posted by SidCoronel

DIY... If you wanna clean your entire intake system try Revive...

Revive turbo cleaner and power restorer for diesel and gas

Price : 5,5php

REPAIR WITH REVIVE

Revive is used to clean engine systems that already have problems caused by soot & oily build up.
By performing three Revive cleaning doses on the vehicle, carbonised layers are removed gradually, making the engine cleaning process very safe.

RESTORES ECONOMY, POWER & EMISSIONS

Cleaning the turbo and other engine internals helps restore fuel economy, regains lost power and reduce exhaust emissions.

VARIABLE VANE TURBOS

Variable nozzle / vane technology can be a major cause of turbo problems due to sticking turbo vanes, cleaning with Revive helps remove soot & oil from the mechanism to restore normal movement.

MUkhang effective yan ah.

It's a bit pricey pero mukhang ok.

Btw, any tips to clean the maf sensor?

do what you gotta do so you can do what you wanna do

**SidCoronel** · June 9th, 2019 06:17 PM

Originally Posted by baludoy

MUkhang effective yan ah.

It's a bit pricey pero mukhang ok.

Btw, any tips to clean the maf sensor?

do what you gotta do so you can do what you wanna do

1) Don't stare hard on the MAF... it might break
2) Use a CRC MAF cleaner, don't be cheap... The MAF sensor is expensive
3) 10-15 1sec bursts per CRC instruction

Pretty straight forward lang MAF cleaning ... Dami sa Youtube

**monty_GTV** · June 9th, 2019 06:27 PM

Originally Posted by SidCoronel

DIY... If you wanna clean your entire intake system try Revive...

okay, thanks. looks easy and convenient[emoji108]

Sent from my SM-G960F using Tapatalk

**ninjababez** · June 9th, 2019 07:57 PM

Originally Posted by Flipo

Actually merong tutorial galing Indonesia at parang madali ding gawin at sa gasoline station yung 1.2k. Dun sa ka-club namin wala ng reprogram, may mas mura kay dadudz at that price kasama na sa PMS niya change oil and brake cleaning, toyota expert pero pwede rin siya ibang brand.

Sent from my ASUS_Z017DA using Tapatalk

Originally Posted by SidCoronel

Correct ka dyan... Start and idle your engine for 2mins with all other accessories off... Turn on all accessories on (especially a/c)... Idle for 2mins... Apply hand brake + step on brake pedal... Place on D... Idle for 2mins... Your good to go

baka gusto lang nya justify yun cost ng service nya.
sinama ko rin air intake baklasin.

not bad for 70k km odo
yun sa vios noon, at 180k km iirc kulangot na nadudukot ko hahaha

btw di ko na nakunan pics yung after, andungis na ng kamay ko eh, napunit nitrile gloves hehehe

Sent from my MI MAX 3 using Tapatalk

**monty_GTV** · June 9th, 2019 08:48 PM

Originally Posted by baludoy

MUkhang effective yan ah.

It's a bit pricey pero mukhang ok.

Btw, any tips to clean the maf sensor?

do what you gotta do so you can do what you wanna do

madali lang yung maf sensor bro, unscrew lang then spray ng maf cleaner. contact cleaner nagamit ko ok din. i even used cotton buds with IPA dati, ok din naman, wala naman masyado dumi kaya kahit spray lang ng cleaner. careful lang dun sa sensor probe na hindi magalaw o madamage.

its the throttle body and the intake manifold that i am tempted to clean but hindi kaya ng "baklas-kalikot skills" ko kahit may tools ako[emoji2960][emoji16] may mga sensors na nakakabit mahirap na. egr kaya ko, ako naglilinis dati. wala na gunk since naka blanking kaya di ko na binubuksan[emoji846]

Sent from my SM-G960F using Tapatalk

**ninjababez** · June 9th, 2019 10:21 PM

Originally Posted by monty_GTV

madali lang yung maf sensor bro, unscrew lang then spray ng maf cleaner. contact cleaner nagamit ko ok din. i even used cotton buds with IPA dati, ok din naman, wala naman masyado dumi kaya kahit spray lang ng cleaner. careful lang dun sa sensor probe na hindi magalaw o madamage.

its the throttle body and the intake manifold that i am tempted to clean but hindi kaya ng "baklas-kalikot skills" ko kahit may tools ako[emoji2960][emoji16] may mga sensors na nakakabit mahirap na. egr kaya ko, ako naglilinis dati. wala na gunk since naka blanking kaya di ko na binubuksan[emoji846]

Sent from my SM-G960F using Tapatalk

naisip ko rin maglagay dati ng oil catch can. kaso every 20k km naman ako plano maglinis, tapos itong ginawa ko kanina 70k km, di pa ganun kahirap linisin. baka ok lang every 50k km.

Sent from my MI MAX 3 using Tapatalk

**monty_GTV** · June 10th, 2019 01:02 AM

Originally Posted by ninjababez

naisip ko rin maglagay dati ng oil catch can. kaso every 20k km naman ako plano maglinis, tapos itong ginawa ko kanina 70k km, di pa ganun kahirap linisin. baka ok lang every 50k km.

Sent from my MI MAX 3 using Tapatalk

naka occ pa din yung unit ko pero lately very minimal o wala na naiipon na oil. di ko na nga matandaan last ko nai-drain since wala naman laman. i checked yung outlet hose ng occ at very faint lang yung traces ng oil. so i assumed na yung blow by gas is more in vapor form and less na yung oil.

Sent from my SM-G960F using Tapatalk

**ninjababez** · June 10th, 2019 02:57 AM

Originally Posted by monty_GTV

naka occ pa din yung unit ko pero lately very minimal o wala na naiipon na oil. di ko na nga matandaan last ko nai-drain since wala naman laman. i checked yung outlet hose ng occ at very faint lang yung traces ng oil. so i assumed na yung blow by gas is more in vapor form and less na yung oil.

Sent from my SM-G960F using Tapatalk

tama ba, ok engine condish bro pag wala or minimal sumasama oil sa blowby?

Sent from my MI MAX 3 using Tapatalk

**Flipo** · June 10th, 2019 09:46 AM

Originally Posted by ninjababez

baka gusto lang nya justify yun cost ng service nya.
sinama ko rin air intake baklasin.

Sent from my MI MAX 3 using Tapatalk

Originally Posted by monty_GTV

madali lang yung maf sensor bro, unscrew lang then spray ng maf cleaner. contact cleaner nagamit ko ok din. i even used cotton buds with IPA dati, ok din naman, wala naman masyado dumi kaya kahit spray lang ng cleaner. careful lang dun sa sensor probe na hindi magalaw o madamage.

its the throttle body and the intake manifold that i am tempted to clean but hindi kaya ng "baklas-kalikot skills" ko kahit may tools ako[emoji2960][emoji16] may mga sensors na nakakabit mahirap na. egr kaya ko, ako naglilinis dati. wala na gunk since naka blanking kaya di ko na binubuksan[emoji846]

Sent from my SM-G960F using Tapatalk

You're right bro ninja, parang madali lang linisin ang TB
Tutorial Bongkar Throttle Body Suzuki Ertiga - YouTube

Bersihkan throttle body suzuki ertiga - YouTube

On the MAF just spray contact cleaner and may nabasa ako na huwag hawakan dahil nga sensitive ito.