Results 1 to 10 of 13
Hybrid View
-
BANNED BANNED BANNED
- Join Date
- Jul 2003
- Posts
- 2,267
January 18th, 2007 07:33 PM #1about to finish my DIY car repair (valve lapping, valve seals, gaskets etc...) corolla gl 91
problema ay yung valve clearance na bago pa man ako nag simula ay mukhang ndi tama so gusto ko siya itama.
kaso unlike the rocker-arm type na may screw for adjustments ng clearance, yung sa kotse ko ay wala. meron siyang adjusting shim ng papalitan mo kung mali ang sukat. pero mukhang mahal ang prosesong ito na suggested ng repair guide. kasi kelangan pa i-measure ang installed shim using a micrometer (wala ako nito at mukhang mahal ito hehehe) then do the computaions tapos bibili ng bagong shim of the right thickness.
any alternative method of doing this??? yung kilala ang ginawa niya dati ay tiniyaga niyang hasain yung shim ng kelangan ng adjustment. but the question is paano kung ang kelangan is mas makapal na shim??? may nabibili ba nito sa atin??? although meron naman akong extra shims sa bahay just in case.
tnx!!!
-
January 19th, 2007 08:33 AM #2
To do it right you need to replace the shims and use a feeler gauge.Make sure na adjust muna ang valve, sayang naman ang pinaghirapan mo kung tumukod ang pistons sa valve.Do you know the clay technique?
-
-
January 19th, 2007 01:15 PM #4
-
Tsikot Member Rank 5
- Join Date
- Nov 2003
- Posts
- 3,849
-
January 22nd, 2007 03:07 AM #6
-
BANNED BANNED BANNED
- Join Date
- Jul 2003
- Posts
- 2,267
January 22nd, 2007 04:48 PM #7what is the clay method???
na install ko na lahat and yung valve clearance na lang ang itatama ko.
will research the clay method kung applcable.
tnx!!!
-
January 24th, 2007 05:28 PM #8
a car that i had sold more than ten years ago, to a bayan seller, is still apparently under my...
LTO car registration and late registration fees