New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Hybrid View

  1. Join Date
    Sep 2013
    Posts
    56
    #1
    Guys I just wanna share a little DIY I just did. O overfilled my engine oil by about 300 ml and O didnt want to drain it via the drain plug in the oil pan and refill the oil. What I did was buy the biggest syringe i could find in the drug store, attach it to a clear plastic aquarium hose then inserted it into the oil dipstick hole then suck the oil with the syringe. Repeated process until O rwmived the rigjt ammount of oil. Easy, no need to crawl under your car!

    Sent from my SM-N920S using Tapatalk

  2. Join Date
    Feb 2014
    Posts
    2,711
    #2
    yeah i've done that.

    for cleanup just feed some degreaser + water through the syringe and hose. then lube the syringe rubber w/ some silicone grease

  3. Join Date
    Oct 2012
    Posts
    27,624
    #3
    which car? how many liters total?

    Sent from my SM-G935F using Tapatalk

  4. Join Date
    Jan 2009
    Posts
    6,275
    #4
    Good tip. Should work equally well with ATF.

    Just remember to use a hose that's long enough to prevent you from accidentally dropping it inside the crankcase. :D

  5. Join Date
    Feb 2014
    Posts
    2,711
    #5
    this is just for sucking out excess oil maybe 150cc

    coz the idiots at the casa always overfill. you're supposed to measure via dipstick after resting the engine for about 5mins. but no they kill the engine then measure immediately. of course it'll read low so they add more oil

  6. Join Date
    Jan 2008
    Posts
    4,726
    #6
    Quote Originally Posted by Vodka View Post
    this is just for sucking out excess oil maybe 150cc

    coz the idiots at the casa always overfill. you're supposed to measure via dipstick after resting the engine for about 5mins. but no they kill the engine then measure immediately. of course it'll read low so they add more oil
    When i do my change oil, i pour 3/4 of the required oil first.. start the engine up to warm. Turn off engine. Measure and fill up to the line

  7. Join Date
    Feb 2014
    Posts
    2,711
    #7
    Quote Originally Posted by yapoy86 View Post
    When i do my change oil, i pour 3/4 of the required oil first.. start the engine up to warm. Turn off engine. Measure and fill up to the line

    the important thing is to allow a few minutes for the oil to settle BEFORE reading the dipshit i mean the dipstick coz that's how the dipstick was calibrated in the first place. you'll read this in every car manual

  8. Join Date
    Feb 2012
    Posts
    1,724
    #8
    Quote Originally Posted by Vodka View Post
    this is just for sucking out excess oil maybe 150cc

    coz the idiots at the casa always overfill. you're supposed to measure via dipstick after resting the engine for about 5mins. but no they kill the engine then measure immediately. of course it'll read low so they add more oil
    That's why when I bring my car in for an oil change, I just carry with me 3 liters. Sabi ko sa mekaniko ako na lang ang magdagdag later. Otherwise, ibubuhos yung buong 4 liters. In my experience, it takes 3 3/4 liters to fill up to the dipstick max level from fully drained.

  9. Join Date
    Feb 2009
    Posts
    5,157
    #9
    Quote Originally Posted by gearhead000 View Post
    That's why when I bring my car in for an oil change, I just carry with me 3 liters. Sabi ko sa mekaniko ako na lang ang magdagdag later. Otherwise, ibubuhos yung buong 4 liters. In my experience, it takes 3 3/4 liters to fill up to the dipstick max level from fully drained.







    Disclaimer:



    Not all cars have capacity of 3750 cc.

  10. Join Date
    Sep 2013
    Posts
    56
    #10
    I wanted to post a picture it but I cNt seem to upload pics here

    Sent from my SM-N920S using Tapatalk

Page 1 of 2 12 LastLast

Tags for this Thread

Draining exess engine oil the easy way.