Jemson Thread [new number]

**OTEP** · June 12th, 2011 02:37 AM

Advising lang po that Jemson will be on vacation until next Friday. Thanks po.

**Blackspeed** · June 12th, 2011 09:15 AM

[QUOTE=OTEP;1764785]The place I found that power window mod was in the 80 series forum of ih8mud.com . They do this on Land Cruisers (which use regular joe Toyota switches). If you can print the article and diagrams, I'm sure Jemson can do it. But I have not seen him do one yet. But all the parts described in the article are in his shop anyways.

Will do the research, thanks for the tip Sir!

**anthon05** · June 16th, 2011 12:53 PM

hi Saan po exact location ni Jemson? palinis ko po yung headlight and paayos ko remote control.

what time siya open on saturday ?

thank you

**crazy_boy** · June 16th, 2011 09:38 PM

Originally Posted by anthon05

hi Saan po exact location ni Jemson? palinis ko po yung headlight and paayos ko remote control.

what time siya open on saturday ?

thank you

along banawe siya. near sogo motel. kaso sabi ni doc naka leave daw siya ngayon

**anthon05** · June 17th, 2011 03:59 PM

Saan side ng banawe? after Quezon Blvd. ( to retiro) or before Quezon blvd. ( to E. Rodriquez)?

pasensya na alam ko lang yung banawe pero yung Sogo hindi ko alam saan.

so this weekend wala siya?

Thank you

**OTEP** · June 18th, 2011 11:04 AM

He is back. I'll be there at 12noon for some work. Sa 'to retiro' side siya. Actually between del Monte and Retiro na span yung kina Jemson.

**Ginnova** · June 18th, 2011 03:42 PM

Originally Posted by Blackspeed

Sa mga nagpagawa ng power windows, just want to know if Jimson/Jameson can convert a one way power window switch to two ways? Sa old cars diba pababa lang ang automatic when you push down the switch, tapos you hold on to the switch to close the windows again? I want sana yung both ways automatic na.....

I cant find sa forum discussion on this. TIA!

check this out. did it to my Innova. Auto-roll up/down with remote capability

YouTube - ‪ginnova1‬&rlm;

**OTEP** · June 20th, 2011 01:32 AM

This is what Jemson looks like (he is installing a back up camera).

**anthon05** · June 21st, 2011 06:11 PM

Thanks Sir Otep...

I'll visit him one of these days. gusto ko palinis yung headlight ko, maitim na kahit naka projector malabo pa rin sa gabi.. and pa check ko din yung alarm patanggal ko immobilizer, one time unlock ko
ayaw mag start. then Lock and Unlock ko uli, ayos na. delikado rin pag nagloko alarm baka hindi ako

makauwi.

**anthon05** · June 27th, 2011 10:11 AM

hi Sir Otep may new contact number ba si Jemson? tex ko siya sa no. na nakuha ko dito,

hindi siya reply. puntahan ko siya this week.

Thank you

**OTEP** · June 28th, 2011 01:07 AM

Pag walang load hindi sasagot yun. I was there last Saturday and Sunday. Dun na nga ata ako nakatira. Pinagawa namin Lancer, ambulance, Jimny saka yung Crosswind ng insan ko.

**beefydog** · July 9th, 2011 10:49 PM

Originally Posted by OTEP

Pag walang load hindi sasagot yun. I was there last Saturday and Sunday. Dun na nga ata ako nakatira. Pinagawa namin Lancer, ambulance, Jimny saka yung Crosswind ng insan ko.

doc otep, kaya po ba nya magkabit ng busina? nagpabili po kasi ako sa japan sa friend ko. pwede ko din po ba sabihin na lagyan nya with relay kahit pwede syang direct para walang bitin sa kuryente kahit ibabad? tama po ba ito? mga magkano kaya damage nito? thanks.

**OTEP** · July 10th, 2011 01:39 PM

Labor rates start at Php300.00 I think. Better to ask him. It goes up as the difficulty level (e.g. some cars you have to take out the bumper, fans, etc.) and materials (wire, terminals, etc.) use increases.

The relay cost Php250 or so. Or just bring your own. Yes, he always puts a relay and a new power wire para walang bitin.

**armscor40** · July 10th, 2011 09:57 PM

been reading this thread, doc otep may ask if jimson also have parts like wirings, crimps, insulators for the attachment of new set of horns, additional parklight/signal led light for the chrome side mirror of starex - are they going to drill? instead of visiting other electrician like rey's i might try his work and see for myself...

**OTEP** · July 11th, 2011 11:37 AM

The have common parts in the shop like wires, electrical tape, connectors, adhesives, etc. And their errand guy can usually buy the parts needed with a minimal surcharge (price of convenience).

They also stock LED parklamps, domelamps, commonly replaced bulbs, some alarm units, etc.

I have no idea on how to properly install those LED side mirror covers but he did that on my father's SLK.

**armscor40** · July 12th, 2011 01:01 AM

ok thats good at least i won't make the run-around myself when parts needed and the other items you mentioned maybe worth seeing...thanks doc appreciate the reply...

**OTEP** · August 16th, 2011 01:37 AM

I met crazy_andy/boy, and edtf (4x4ph) at Jemson's shop yesterday and today. Nice meeting you folks.

**LoPro** · August 16th, 2011 03:52 AM

Was at Jemson's shop last Saturday morning and have all of these done:

- Installed HID
- Installed Horn (w/ improvised bracket)
- Installed Window Visor
- Changed Park Lights to LED White
- Changed Dome Lights to LED White
- Change Gauge Bulbs to Amber
- Double-Contact Clearance Lights
- Replaced Alarm Siren

Ang sarap having all of these done in one place! And wala ako dala kahit anong piyesa, sila tumakbo lahat!

Had to bring back the car back last Sunday kasi medyo maluwag yung speedometer, but it was fixed in a jiffy! Salamat Doc! Salamat Jemson!

**OTEP** · August 16th, 2011 08:24 AM

Nice meeting you po sir.

Dami mo pala pinagawa. Was having my leaking windows fixed by Jemson the electrician (pwede pala yun). hehe.

**GTS925** · August 31st, 2011 06:33 PM

Sir naglilinis ba sila ng gauge at nag rereplace ng ilaw?

The Largest Car Forum in the Philippines

Jemson Thread [new number]

Thread Tools

Search Thread

Display