New and Used Car Talk Reviews Hot Cars Comparison Automotive Community
New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Results 1 to 7 of 7

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. cokezero's Avatar
    cokezero
    cokezero is offline Tsikoteer
    Join Date
    Aug 2010
    Posts
    333
    May 19th, 2014 10:41 PM #1
    noticed last week na hindi nag ssnap yung switch pang high beam.. hindi nag llock.
    ngayon pag nag ssignal ako nag fflicker yung headlight ko kasi parang na aalog yung lever switch, sira kaya yung mismong switch? or relay lang sana?

    isuzu tfr / fuego
    Reply With Quote Reply With Quote
  2. dr. d
    dr. d is offline Tsikoteer
    Join Date
    Mar 2008
    Posts
    54,619
    May 20th, 2014 12:30 AM #2
    Quote Originally Posted by cokezero View Post
    noticed last week na hindi nag ssnap yung switch pang high beam.. hindi nag llock.
    ngayon pag nag ssignal ako nag fflicker yung headlight ko kasi parang na aalog yung lever switch, sira kaya yung mismong switch? or relay lang sana?

    isuzu tfr / fuego
    sounds like the switch... i hope the replacement part is not too expensive..
    Reply With Quote Reply With Quote
  3. cokezero's Avatar
    cokezero
    cokezero is offline Tsikoteer
    Join Date
    Aug 2010
    Posts
    333
    May 20th, 2014 09:13 AM #3
    hindi ba na aayos yung ganyan sir?
    Reply With Quote Reply With Quote
  4. dr. d
    dr. d is offline Tsikoteer
    Join Date
    Mar 2008
    Posts
    54,619
    May 20th, 2014 03:07 PM #4
    Quote Originally Posted by cokezero View Post
    hindi ba na aayos yung ganyan sir?
    as jick says, puede kung puede. but it really depends on the partricular part. if it is a weight-bearing part or pressure part or friction part, i suggest complete replacement, because chances are it will break again...
    but you will have to remove the assembly and see if it is worth glueing.
    but if the part is next-to-impossible to source or is very expensive (memories, memories..), then glueing may be your only recourse..
    good luck.
    btw, sometimes, epoxy is the better glue material, because it offers "body" or bulk, that cyanoacrylate can not give.
    Reply With Quote Reply With Quote
  5. cokezero's Avatar
    cokezero
    cokezero is offline Tsikoteer
    Join Date
    Aug 2010
    Posts
    333
    May 20th, 2014 03:27 PM #5
    sana pwede pa maayos.. do you guys know where i can take my pickup? nag inquire na ako sa shops that specializes in isuzu 3200 yung original nila na switch :| mag papaayos pa sana ako ng pang ilalim kaya nag dadalawang isip ako.. sayang 3k eh
    Reply With Quote Reply With Quote
  6. dr. d
    dr. d is offline Tsikoteer
    Join Date
    Mar 2008
    Posts
    54,619
    May 20th, 2014 03:38 PM #6
    Quote Originally Posted by cokezero View Post
    sana pwede pa maayos.. do you guys know where i can take my pickup? nag inquire na ako sa shops that specializes in isuzu 3200 yung original nila na switch :| mag papaayos pa sana ako ng pang ilalim kaya nag dadalawang isip ako.. sayang 3k eh
    surplus, from the katay centers in banawe and evangelista..
    but these are used parts, and offer no protection from premature failure in the future.. so, choose well...
    Reply With Quote Reply With Quote
  7. jick.cejoco's Avatar
    jick.cejoco
    jick.cejoco is offline ASE MasterTechnician
    Join Date
    Feb 2009
    Posts
    5,167
    May 20th, 2014 02:18 PM #7
    Usually it is the plastic components of the Combination Switch that break. They are commonly made of ABS plastic that can be mended by using cyanoacrylate or "super glue/krazy glue". Just be careful when you are doing the surgery, there are small spring and parts that could easily disappear. Relubricate with Vaseline when reassembling


    Nakiki wi-fi lang
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Tags for this Thread


High beam switcher