headlight problem

**tononoink** · March 5th, 2013 02:00 PM

mga ser..help naman po pag nka high ang ilaw ko e "bulag"..isa lng ang gumagana pero pag low or park light ok naman pareho..ano p[o kya main cause nito..newbie lng po pagdating sa kotse...thanks in advance

**1D4LV** · March 5th, 2013 02:23 PM

pundido na yung high beam mo.
change bulbs ka na lang bro.

**dr. d** · March 5th, 2013 10:42 PM

yung mga PUJ.. laging naka-high beam at night. i suspect pundido na ang low beam filaments nila.. ayaw lang pagka-gastusan at palitan..

**s_quilicot** · March 6th, 2013 11:25 AM

Originally Posted by dr. d

yung mga PUJ.. laging naka-high beam at night. i suspect pundido na ang low beam filaments nila.. ayaw lang pagka-gastusan at palitan..

Sealed beam kasi yung mga headlight nila. Buong assembly pinapalitan pag napundi.

**dr. d** · March 6th, 2013 06:52 PM

Originally Posted by s_quilicot

Sealed beam kasi yung mga headlight nila. Buong assembly pinapalitan pag napundi.

Still!
but kung ayaw nilang palitan, at least naman, ibaba naman nila ang asinta...

**LN106G** · March 8th, 2013 06:22 AM

Originally Posted by dr. d

Still!
but kung ayaw nilang palitan, at least naman, ibaba naman nila ang asinta...

The mounting for the sealed beams used by PUJ assemblers are poorly constructed and sometimes the headlight aim adjusting screws are impossible to adjust or non-existent. It is rare to see a PUJ with a headlight in good aim alignment

**dr. d** · March 8th, 2013 10:25 PM

Originally Posted by LN106G

The mounting for the sealed beams used by PUJ assemblers are poorly constructed and sometimes the headlight aim adjusting screws are impossible to adjust or non-existent. It is rare to see a PUJ with a headlight in good aim alignment

yup. dapat kasi hulihin yan, e. driving hazard...