New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Page 1 of 2 12 LastLast
Results 1 to 20 of 24
  1. Join Date
    Sep 2010
    Posts
    15
    #1
    biglang di gumana yung headlight ko and i remember na pinaayos ko na to at from 55w capacity ginawa na tong 155w.. nung chineck ko yung fuse ng headlight tunaw na to. 10 amperes yung natunaw.. ilang amperes kaya dapat ko ipalit sa 10??? 15 or 30 kaya? sana fuse lang yung sira..hehe

  2. Join Date
    Jun 2010
    Posts
    258
    #2
    paps di kaya sobra lakas naman nyan 155w na headlight nyo?

  3. Join Date
    Jul 2008
    Posts
    351
    #3
    for 155w, you need to install relay... it is a must!!!!

  4. Join Date
    Sep 2010
    Posts
    15
    #4
    may relay na po un sir.. kazo natunaw nmn ung 10 amp n fuse ng headlight.. dpt ko lng b taasan ung amperes ng fuse?

  5. Join Date
    Mar 2010
    Posts
    2,209
    #5
    Quote Originally Posted by rdmwow View Post
    may relay na po un sir.. kazo natunaw nmn ung 10 amp n fuse ng headlight.. dpt ko lng b taasan ung amperes ng fuse?
    siguro bawasan mo na lang yung wattage ng bulb mo. parang delikado e. mag nightbreaker na lang.

    Natunaw yung fuse as in yung plastic na part pero yung bakal buo pa rin?

    robot.sonic

  6. Join Date
    Sep 2010
    Posts
    15
    #6
    opo ung plastic part lng ndi ung bakal..

  7. Join Date
    Aug 2005
    Posts
    7,186
    #7
    kulang talaga ang 10 Amp fuse para sa 155 watts na bulb. minimum ay mga 15 amps for each bulb.

    IMHO, grabe naman sa over wattage. peace.

  8. Join Date
    Sep 2010
    Posts
    15
    #8
    155w ung maximum capacity pero yung gamit ko ata ngaun 100 something lng..hehe so try ko lang muna palitan ung fuse kht 15 amp lng muna? bago nmn ung mga wiring and relay nun eh..

  9. Join Date
    Aug 2005
    Posts
    7,186
    #9
    kung 100W ang bulb, dapat kaya ng 10Amp fuse. iyon lang nga, 1 fuse for every HL bulb.

    kung 1 fuse para sa 2 units ng 100W HL bulb, dapat mga 20 amp na fuse.

  10. Join Date
    Jul 2009
    Posts
    2,628
    #10
    Flosser ba yun brand ng bumbilya?

  11. Join Date
    Dec 2008
    Posts
    105
    #11
    Hi.

    Just remembered when buying fuses na yung nagkalat sa mga auto supply ay mga china made fuses. Those that have plastic na kita mo yung bakal sa loob.

    Try to search for non-China fuses na yung plastic ay di mo kita yung bakal sa loob.

    By comparison, the 10amp fuse of these two makes do not have the same thickness ang bakal. So I suspect, the china-made fuse tinipid ang bakal. Hehehe.

    My non-China 10A fuse has thicker metal than the China-made 20A fuse.


    Re headlight wattage, ang taas kung 155watts. Ok lang if 100 watts. According to OSRAM dealer, they discourage going about 110 watts. Dahil sa init ng bulb, pag naulanan, prone na mabasag ang bulb due to hot-cold environment.

    HTH.

  12. Join Date
    Sep 2010
    Posts
    15
    #12
    guys napundi lng pala yung bumbilya q pero bago bili naman un.. narva na bulb yung napundi.. pinalitan ko na ng osram na bulb..

  13. Join Date
    Aug 2005
    Posts
    7,186
    #13
    Palala lang po, bawal ang text speak.

  14. Join Date
    Jul 2010
    Posts
    22
    #14
    query lang po sa inyo, ok lang po ba if I use the 85w H7 bulbs as replacement sa stock 55w. meron pa ba ako imodify sa wirings? or ma-void kaya yung warranty ng car? thanks po.

  15. Join Date
    May 2009
    Posts
    1,990
    #15
    FYI mga paps,
    to determine current drawn by any electrical load, follow this formula: Power (P in watts) = Current (I in amperes) x Voltage (V in volts)

    given the specs above as our example:

    Before: 55W, 12V system
    P = IV
    55 = 12I
    I = 4.6 Amperes, thus a 10A fuse will do.

    After: 155W, 12 V system
    (same formula)
    I = 12.92 Amperes, thus the 10A fuse will blow.

    Fuses should be loaded approx 80% of its rated ampacity.
    Example: Load = 100 A
    Fuse rating = 80 A

    My suggestion is go back to your stock specifications...for mods, upgrade your system plus the wires should also be replaced to a higher gauge if the stock wire will not also hold the electrical load.

  16. Join Date
    Aug 2009
    Posts
    385
    #16
    question lang po, headlight ng corolla xe 95 model gumagana yung isa pag park light and high beam pero pag normal wala ilaw, kailangan na bang palitan?

  17. Join Date
    Jul 2004
    Posts
    1,540
    #17
    Quote Originally Posted by jojomonsalud View Post
    question lang po, headlight ng corolla xe 95 model gumagana yung isa pag park light and high beam pero pag normal wala ilaw, kailangan na bang palitan?

    Could be a busted low beam filament on the H4 bulb. You can try to go to any auto shop and have them change that bulb. If wala pa din, let them trace the problem.

  18. Join Date
    Jun 2010
    Posts
    354
    #18
    ano po mga kailangan if nag upgrade ka ng headlight? baka kasi magka problem din ako...

  19. Join Date
    Jul 2004
    Posts
    1,540
    #19
    Quote Originally Posted by aijie28 View Post
    ano po mga kailangan if nag upgrade ka ng headlight? baka kasi magka problem din ako...

    What kind of upgrade? You don't need to upgrade naman. What you need to do is just change the defective bulb or wiring.

  20. Join Date
    Sep 2010
    Posts
    9
    #20
    Hi Guys,

    My ride is a honda city 2006 idsi. Kagabi napansin ko na walang ilaw yung left headlamp. I tried using high beam, umilaw naman parehong headlamp. Sa low beam lang ayaw gumana nung left side. Ano kaya ang problema? Thanks in advance.

Page 1 of 2 12 LastLast
headlight problem