Quote Originally Posted by paetechie View Post
OBD II ba yang kotse mo? I have an OBD II scanner to read CEL and I live just near Munoz. OBD II has the connected usually under the driver dashboard (honda civic near the center, vios is in front of the drivers seat)

on capacitors, any repair shop can do it...don't notice one on roosevelt/frisco though. depends also on the function of the capacitor. it's just a minor soldering job I can even do it but buy the part yourself (in Munoz near Mercury there are electronics shops)

in raon, one of my favorite haunts, there are also many repair shops (i'm an ECE and electronics used to be my hobby)
sir I have no idea if obd II ba tong oto ko.. but I have my car diagnose by Car Zone in banawe and they have scanned it from this specific location


wala naman nakitang problema.. now hindi na talaga matangal yung CEL nung ginalaw ng mekaniko.. so problema ko naka stock yung kotse dun... they say it might be main relay or my comnputer box na talaga. wala naman lost and corroded capacitors sa ecu ko naayos na nga pero ganun pa din.. ayaw na matangal ng CEL on second click na supposedly dapat mawala in just 5 -8 seconds lalong nagkaron ng problema.

sir near munoz ka ba?? yung oto ko kasi.. nasa along del monte ave after police station 2. naka stock kotse kasi ayaw mag start dahil ayaw na mawala nung CEL, meron dun mechanic shop yung red na esi akin yun. hindi ko alam if OBD II yung kotse ko. baka sir matulungan nyo ko? pm na lang po tayo mag usap for price... wala din kasing gamit yung mechanic shop na pinag dalan ko mga polpol. hehe.


Quote Originally Posted by raine View Post
sa civic 96 vti, ganyan din yata, pag ignition "on" lahat ng ilaw sa dashboard mag"on" including orange CEL , then after about 5 secs mamamatay na ang CEL , this time doon ko lang start ang makina kasi doon lang natapos ang system power up test,then pagka nakaidle na ang makina dapat remain "off" ang CEL , kung ganito ang situation normal lang ito, but kung iilaw ang CEL then doon merong trouble. parang ganito lang ang nangyayari sa iyo at normal lang ito,

sir hindi normal yung problema ko... problem ko matagal mawala yung CEL on second click hindi ko naman po sinabi na may CEL ako when engine starts... super delayed lang talaga mawala ng CEL ko. pero tanga tanga na mekaniko pinag dalan ko ginalaw lahat at ngayon ayaw na mawala ng CEL on second click. sigh