2005 Optra Front Shocks

**md_alcapone** · February 12th, 2011 07:57 PM

how do i clean the headlight assembly ng optra na nag yellow?

**md_alcapone** · February 12th, 2011 08:01 PM

saan ba nakakabili ng spareparts sa optra 2005? nandito ako sa mindanao at wala kasi piyesa, kindly post any number that i can call. wala pa naman casa dito sa amin. thanks!

**iambrien** · February 14th, 2011 12:47 AM

Originally Posted by md_alcapone

how do i clean the headlight assembly ng optra na nag yellow?

you can find sample videos on the web. there are also threads here in tsikot.

you initially need. sad papers (wet/dry) from 200 to 2000 and car polish.

**md_alcapone** · February 14th, 2011 02:29 PM

where can i buy optra shocks?

yung mga plastics sa loob ng car?

fog lamp bulb?

childlock?

headlight assembly?

etc...

wala kasi sa thunder...

**iambrien** · February 20th, 2011 01:13 AM

Originally Posted by dndk2007

you dont need to buy new rims/magwheels for your optra. the 15" stock is fine (not unless you really need to be different). if your rims has full of scratches or stains, it can be clean or refurbish to look as bnew.

check sulit.com, dami naka-post na rims/mags. used, refurbish, etc. goodluck

hehehe 17inch kc mags ko mahal tires kc.gusto ko stock na 15 lang po. cnu gusto swap?

**iambrien** · February 20th, 2011 06:05 AM

Sirs,

paano po ba aayusin ang off centered na manibela?
Thanks

**md_alcapone** · February 20th, 2011 12:56 PM

Originally Posted by iambrien

hehehe 17inch kc mags ko mahal tires kc.gusto ko stock na 15 lang po. cnu gusto swap?

may pics ka sir?

**dndk2007** · February 21st, 2011 05:51 PM

Originally Posted by iambrien

Sirs,

paano po ba aayusin ang off centered na manibela?
Thanks

me kabeg? pa-wheel check mo, wheel-alignment mo, camber.
servitek will do. but be ready, there might be some part subject for replacement like the bolt-joint, rack-end... stabilizer... etc.

in case me papalitan, take the stock-part and check any auto-car-part shops for any good quality brand counterfit, basta kasukat and that will be just be fine, naka-mura ka pa. and buy in pair, palitan mo sabay ang left at right what ever the part that needs to be replaced. goodluck !

**iambrien** · February 21st, 2011 06:20 PM

Originally Posted by dndk2007

me kabeg? pa-wheel check mo, wheel-alignment mo, camber.
servitek will do. but be ready, there might be some part subject for replacement like the bolt-joint, rack-end... stabilizer... etc.

in case me papalitan, take the stock-part and check any auto-car-part shops for any good quality brand counterfit, basta kasukat and that will be just be fine, naka-mura ka pa. and buy in pair, palitan mo sabay ang left at right what ever the part that needs to be replaced. goodluck !

sir, ill have to check pero observation ko hindi centered ung manibela, kapag nasa center kabeg sa right.sana alignment lang. hehehe

**dndk2007** · February 22nd, 2011 09:41 AM

Originally Posted by iambrien

sir, ill have to check pero observation ko hindi centered ung manibela, kapag nasa center kabeg sa right.sana alignment lang. hehehe

if the camber result of your wheel alignment is fine and within the optra's manual camber reasult but your stering wheel is still off-center, me problema pa yan pero very minimal lang. madami babaklasin sa manibela just to align but in my opinion doing so is not good kase ina-alter mo yung possible problem sa front wheel system.
Pag walang problema ang mga parts ng front wheels system, naka on-center dapat ang manibela after alignment maski di mo pa-adjust yung manibela. (once pina-ayos mo yung manibela to center it and soon me pinalitan ka na parts ng front wheel mag-o-off center ulit yung manibela mo). goodluck!