Door lock problem (RattleSnake Brand)

[mjamolin24]

Hi mga sirs, tanong lang po regarding sa door lock ng kotse ko, gumagana pa naman yong remote at alarm pero yong lock at unlock hindi na umaangat at lumulubog kapag pinindot ko sa remote. kaya ginagawa ko sinususian ko nalng para maglock sya. ano po sira kapag ganun? Thanks po..

[jodski]

First thing to check dyan bro is kung either lumuwag ang mga screws or nawala sa alignment yung pinagkakabitan ng door lock actuators.

Sent from my ASUS ZenFone 4 using Tapatalk

[dr. d]

also, have the remote itself, checked.
maybe the batteries are weak? or the buttons' contacts are dirty?

[mjamolin24]

also, have the remote itself, checked.
maybe the batteries are weak? or the buttons' contacts are dirty?

Gumagana po yong remote.. hindi lang sya naglolock yong sa door hindi sya lumulubog. pero tumutunog kapag pinindot ko yong remote..

[mjamolin24]

First thing to check dyan bro is kung either lumuwag ang mga screws or nawala sa alignment yung pinagkakabitan ng door lock actuators.

Sent from my ASUS ZenFone 4 using Tapatalk

hindi lumulubog lock ng 4 door kapag pinindot ko lock sa remote pero natunog sya.. pero kapag sinusi ko sya sa lock lumulubog nman po yng lock sa door. thanks

[jodski]

hindi lumulubog lock ng 4 door kapag pinindot ko lock sa remote pero natunog sya.. pero kapag sinusi ko sya sa lock lumulubog nman po yng lock sa door. thanks

Yung master actuator pa check mo.

Yan yung nakalagay sa driver side.



Sent from my ASUS ZenFone 4 using Tapatalk

[mjamolin24]

Yung master actuator pa check mo.

Yan yung nakalagay sa driver side.



Sent from my ASUS ZenFone 4 using Tapatalk

Ok po check ko.. Thanks po

[mjamolin24]

Yung master actuator pa check mo.

Yan yung nakalagay sa driver side.



Sent from my ASUS ZenFone 4 using Tapatalk

Sir, naayus ko na naglolock na po sya.. lumuwag lang yong screw kaya natanggal yong tumutulak ng lock.. Maraming salamat Sir..

[zan]

Reys electrical does a good job in fixing door lock problems.

[mina_nuka]

that same lock with that problem will repeat itself. secure the screw with some sort of thread locking compound

http://www.loctiteproducts.com/img/p.../t_lkr_red.png