Results 1 to 3 of 3
-
Verified Tsikot Member
- Join Date
- Nov 2003
- Posts
- 98
December 29th, 2004 05:26 PM #1hi guys, anyone here tried to change a car alarm by themselves. gaano ba ka complicated gawin to? gusto ko sanang palitan yung titan alarm ko with cobra but still retain the original door actuators and sensors. mahina na kasi range ng titan (even with new batt).
-
January 1st, 2005 08:04 AM #2
Try extending or adding extra wire to the alarm antenna, if that didn't work cut the old wires and solder the matching connection (12v, neg., parking lights..etc.) to the new alarm. Good luck.
Last edited by SiAKOL; January 1st, 2005 at 08:07 AM.
-
Verified Tsikot Member
- Join Date
- Nov 2003
- Posts
- 98
January 10th, 2005 12:47 PM #3napalitan ko na yung alarm na cobra yung titan alarm ng car ko. ok naman lahat except for the starter kill feature ng alarm. baliktad ang nangyayari ngayon. bale kung armed ang alarm, gumagana yung starter but if disarmed, di gumagana. ano kaya yung mali ko? i followed naman all wirings sa old alarm. help naman mga peeps. thanks all :D
3M Color Stable series are all above 50% TSER. RFID readable through the tint, stays good for...
What's the best car tint brand and color?