may mga style taga-banawe dito e, my primary concern is what the DIY precautionary measures, etc. are, if any. then kung anong solutions/procedures needed.
There was posted before a suggestion of using a glass cleaner solution and a baby bottle brush (with sponge end). Remove the housing and the bulbs. Pour the glass cleaner solution into the housing and use the bottle brush to "wipe" the stubborn dirt sticking to the inside of the housing. Then pour out the dirty solution and rinse with clean water twice or three times until no solution is left inside. To dry the housing, its suggested to use compressed air to blow out most of the water then place it under the sun to help it dry out completely.
After cleaning it, inspect the housing for vents and holes where the dirt got in and plug it with silicon or tape it close.
what we did with vinj's accord is tinaggal namin ung assembly..tapos nilinis namin ang loob using soap, water and cotton...kailangan mo rin ng hair drier.
put water...with powder soap sa lens....tapos..mga 5 coton balls...play with the cotton balls inside..parang nag wi wipe sila ng dumi.....
tapos basta para ka lang naglalaro...wiping the dirt inside...