Where can I get soundproofing for hood/firewall/floors/headliner/etc.?

**han28** · June 25th, 2013 04:23 PM

Anyone know where I can get soundproofing done for the more uncommon areas?

The typical audio shop doesn't offer for these areas.

Thanks in advance.

**jhnkvn** · June 25th, 2013 08:28 PM

Originally Posted by han28

Anyone know where I can get soundproofing done for the more uncommon areas?

The typical audio shop doesn't offer for these areas.

Thanks in advance.

Then you'll be looking at car audio specialty stores. Where's your location?

**jay185** · June 25th, 2013 08:33 PM

Sa north san recommended?

Sent from my GT-N7000 using Tapatalk 2

**jhnkvn** · June 25th, 2013 08:54 PM

North as in Bulacan North or Antipolo North? Your general location please ;)

**han28** · June 27th, 2013 12:19 AM

Originally Posted by jhnkvn

Then you'll be looking at car audio specialty stores. Where's your location?

jhnkvn, Ortigas Center area.

**jay185** · June 27th, 2013 12:35 AM

North bulacan

Sent from my GT-N7000 using Tapatalk 2

**jhnkvn** · June 27th, 2013 01:31 AM

Originally Posted by han28

jhnkvn, Ortigas Center area.

Closest would probably be Pasig area - Mach2Audio and Mickeys Audio Sound in Amang Rodriguez.. dulo nun is Ortigas Ave. Extension.

**jhnkvn** · June 27th, 2013 01:32 AM

Originally Posted by jay185

North bulacan

Sent from my GT-N7000 using Tapatalk 2

Take a trip sa Banawe

Go check out Candyshop, JetCar, Maspro among others. Too bad DawgAudio is undergoing renovation.

**jay185** · June 27th, 2013 02:00 AM

Originally Posted by jhnkvn

Take a trip sa Banawe

Go check out Candyshop, JetCar, Maspro among others. Too bad DawgAudio is undergoing renovation.

Kahit sino sa kanila boss? Tumatangap din kaya sila ng card?

Sent from my GT-N7000 using Tapatalk 2

**wezz_zzew** · June 27th, 2013 02:08 PM

Try to copy/paste this link on your browser.

http://tsikot.com/forums/car-audio-v...25/index7.html

Based on experience, ok naman ung performance nung nabili ko Deadening Sheets. Last Week, I installed sa hood ko para mabawasan ung rattle. nag work naman. Still planning to install sa mga door panels kaso tinatamad pa ko dahil mejo matrabaho kalasin. Suggestion ko lang, if you have time, DIY na lang. You will save more and you may also learn something na pwede mo magamit in future or i-share sa iba.