how to remove innova HU

**1997** · December 13th, 2008 10:44 PM

Guys gusto ko lang sana malaman kung paano mag tangal ng HU ng Innova... Mag DIY sana ako eh...

**bratski** · December 14th, 2008 12:39 AM

first pull out the three knobs (blower control knob,thermostat knob and the blower redirect knob). on the blower control knob(center knob), there's a screw there that you need to remove. after removing the screw there are four clips on each corner,just pull on one corner at a time, thats it.

**1997** · December 14th, 2008 12:55 AM

Originally Posted by bratski

first pull out the three knobs (blower control knob,thermostat knob and the blower redirect knob). on the blower control knob(center knob), there's a screw there that you need to remove. after removing the screw there are four clips on each corner,just pull on one corner at a time, thats it.

Manay thanks po... DIY time na...