New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Results 1 to 9 of 9
  1. Join Date
    Sep 2004
    Posts
    1,388
    #1
    sino may alam where I can get the cheapest CD-RB20?

    kahit second hand pwede na din?

    btw, locally lang ha. Hehe


    Last edited by albert_b; February 15th, 2006 at 08:30 PM.

  2. Join Date
    Sep 2004
    Posts
    1,388
    #2
    Hehe ... I found it! Merong seller sa http://kotseaudioclub.com ;-)

  3. Join Date
    Sep 2004
    Posts
    1,388
    #3
    Palpakis!!! The seller backed out! Pagkatapos niya ako paghintayin ng pagkatagal-tagal eh wala din pala. The product (home-made-did-it-himself-project) suddenly had "technical problems" daw.
    Ahm, questions:
    1) I've seen the schematic for a CDRB20 and from the looks of it (and I agree it should have one) meron siyang isolation circuit to cleanly separate the signals from the aux and from the cd changer ... however the seller says his product doesn't have one... well he didn't exactly say that pero when I asked him (over the phone) where he bought the isolation chips, sabi niya wala ... and I was astonished kasi he probably made the module using solid state devices... pero hindi din daw (leading me to conclude that he didn't put in an isolation circuit)
    2) Please lang po hehe saan po pwede makakuha murang CDRB20 please please :-D ... if yung sa-suggest nyo po is >3T hehe di ko na yun afford ;-)

  4. Join Date
    Sep 2004
    Posts
    1,388
    #4
    After hours and hours of looking for this in the internet, I found it again! :-D

    The CD-RB20 schematic diagram :-D yey! ... blurred nga lang haay :-(

  5. Join Date
    Sep 2004
    Posts
    1,388
    #5
    and ofcourse the IP Bus pin outs



  6. Join Date
    Sep 2004
    Posts
    1,388
    #6
    using this alone you can already make your self a home made CD-RB10.

    As for the pins, someone (can't remember who) suggested you can replace the IP Bus (PIO/P-AUX) jack with these :-D

    tapos tightly lock it with tie wires :-)

    hehe ano nga ba tawag sa mga 'to?
    Last edited by albert_b; February 15th, 2006 at 08:23 PM.

  7. Join Date
    Sep 2004
    Posts
    1,388
    #7
    and ofcourse if you want it to look really OEM, eto dapat itsura niya


    for the complete instructions follow the link :-)

    hehe na-obsessed na talaga ako!

    Galing ... may hack siya for a CD-RB10! http://www.gutterslide.com/ip-bus_hack/

    Yahoo! May alternative na sa overpriced CD-RB10s!!!

    now if only the CD-RB20 were as easy to make din :-(
    Last edited by albert_b; February 15th, 2006 at 08:25 PM.

  8. Join Date
    Oct 2002
    Posts
    15,528
    #8
    hehehe. kala ko gumawa ka na eh. papagawa na lang sana ako sa iyo eh.

    anyway, try out the shop sa Park Square 1 in front of Olympic Village. I've noticed they are selling pioneer stuffs and accessories. kung wala silang stock, pwedeng umorder. 50% down lang tapos pay the balance after the unit has been released, picked-up or delivered.

  9. Join Date
    Sep 2004
    Posts
    1,388
    #9
    talaga?! o sige daan ako ;-) Sana mura, otherwise ... this will be another DIY for me :-D

Cd-rb20