audio set-up for beginners [continued]

[andrew_28]

Trust me, in the sub-10k speaker category, most of them are so similar that it's frightening. There are differences in sound but that's thanks to speaker materials where the majority are made of either PP (Polypropylene) or paper. Their crossover networks are geared for mass production and isn't what you call unique to each one.

In any case, go for it.

thanks for the reply. anyway the shop owner even guaranteed that the speakers are better sounding than jbl gto seperates

[SEALANDER]

is that the v12 bootleg amps? color black and red? Mahal yan sa 4K...Nasa 2 to 3k lang yan...

Yes black and red. What I know is that V12 amplifiers are made by Alpine. Pero walang Alpine na tatak. Correct me if I'm wrong. What about its performance?

[mateomarco]

Yes black and red. What I know is that V12 amplifiers are made by Alpine. Pero walang Alpine na tatak. Correct me if I'm wrong. What about its performance?

Those are china or taiwan made na sir...In short, hindi na po alpine mga yan...Okay nman po yan...yung 805 na may powerpunch na nakalagay, okay po yan...saw and installed plenty of setup with that budget amplifier...

[ParticleX]

Ask ko lang where do I plug my tweeters? Sa amp ba or sa stereo?

Kasi I plugged in my seps directly sa stereo (bypassing the amp) for a while now... Then I tried plugging the seps kahapon to the amp and nagulat ako kasi mas naging klaro, although parang naging makalansing masyado, overpowering yung tweeters. Naka set naman sa 0 boost yung treble.


Thanks!

[ben_david19]

Ask ko lang where do I plug my tweeters? Sa amp ba or sa stereo?

Kasi I plugged in my seps directly sa stereo (bypassing the amp) for a while now... Then I tried plugging the seps kahapon to the amp and nagulat ako kasi mas naging klaro, although parang naging makalansing masyado, overpowering yung tweeters. Naka set naman sa 0 boost yung treble.


Thanks!

teka ginamit mo ba ang passive crossover ng seps? kasi iyan ang nagfi-filter ng frequencies na papasok sa midbass at tweeter. yung amplifier dapat naka-level match din sa head unit.

kung component speakers/separates, dapat kasi may passive crossover. so kahit saan mo sila ikabit pwede. kung sa amp, sa full mo ilagay (both hpf and lpf), either way frequencies will still be filtered by the passive crossover. (pa-correct nalang mga gurus kung mali ako)

[ParticleX]

teka ginamit mo ba ang passive crossover ng seps? kasi iyan ang nagfi-filter ng frequencies na papasok sa midbass at tweeter. yung amplifier dapat naka-level match din sa head unit.

kung component speakers/separates, dapat kasi may passive crossover. so kahit saan mo sila ikabit pwede. kung sa amp, sa full mo ilagay (both hpf and lpf), either way frequencies will still be filtered by the passive crossover. (pa-correct nalang mga gurus kung mali ako)

Yes may passive xover. Medyo nadodrown kasi ang mids and lows, overpowering na yung highs, or di lang ako sanay

Set ang gains ng amp (0, +6, +12db) for treble and bass, naka 0 gain dun sa channels nung separates.

Am thinking na subukan ko ikabit ulit sa stereo yung tweeters (bypassing the amp). Kapagod kasi mag reinstall ng door panels

[ben_david19]

Yes may passive xover. Medyo nadodrown kasi ang mids and lows, overpowering na yung highs, or di lang ako sanay

Set ang gains ng amp (0, +6, +12db) for treble and bass, naka 0 gain dun sa channels nung separates.

Am thinking na subukan ko ikabit ulit sa stereo yung tweeters (bypassing the amp). Kapagod kasi mag reinstall ng door panels

hmmm, I think kaunting timpla lang sa amplifier gain for the 2 channels na ginagamit ng seps. then ok na iyan sir.

[ParticleX]

hmmm, I think kaunting timpla lang sa amplifier gain for the 2 channels na ginagamit ng seps. then ok na iyan sir.

Tinago ko na lang yung tweeters, kahit anong adjust ko sa amp wala pa rin. Nilagay ko below the dash. Oks na ngayon

Edit: fixed kasi ang gain (walang gain pot/knob) in 0, +6, and +12db increments

[retsuyaken]

Hihingi lang po ako ng advice.

Stock po ang headunit and speakers on all four doors. May subwoofer ako na JBL with an amp na V12 ang tatak. Nagpaplano po kasi akong mag-upgrade ng speakers and headunit.

Ang nakikita ko ay yung DLS Reference RS6N. Kailangan ko pa po ba magdagdag ng amps? If so, anong wattage ng amp ang kailangan ko kaya? Sabi sa net eh Peak ng dls ay 160 per pair tapos RMS is 100 per pair.

Salamat po ng marami.

EDIT: may tweeters din nga po palang kasama yung DLS

[jhnkvn]

Tinago ko na lang yung tweeters, kahit anong adjust ko sa amp wala pa rin. Nilagay ko below the dash. Oks na ngayon

Edit: fixed kasi ang gain (walang gain pot/knob) in 0, +6, and +12db increments

Most passive crossovers have tweeter attenuation controls naman. You should check your settings doon.

If not, just balance it by increasing the output of the other regions (midrange, midbass) by increasing the midbass gain.

Ganun talaga mga tweeter, they're highly sensitive to power. Give them 2W of power, you'll be doing 93 decibels. On the otherhand, a midbass getting 2W of power will usually be doing just 80ish decibels.