Adding Speakers

[MAXBUWAYA]

Originally this Car has only two lousy speakers, thing is that i wanna make them four(like four lousy speakers hehehe)

So how do I do the wiring?

I opened the HU and there are no wire for the two speakers for the rear.

[MAXBUWAYA]

http://tsikot.yehey.com/forums/attac...1&d=1190096461

http://tsikot.yehey.com/forums/attac...1&d=1190096461

[nicolodeon]

Fafa Max, can you take a pic of the wiring harness that attaches directly to the HU. Pati na rin pic ng HU mo at make and model so that it would be easier for us to solve this.

[MAXBUWAYA]

Ok balik ako bukas with the additional photos

[toolightz]

try replacing not adding

IMHO: replace mo na yung stock speakers mo with a decent one like seperates 2pcs mids 2pcs tweeters! try mo yung mga targa and fenton amps for the budjet set ups!
if budjet constrains try to power it by your HU first the if not satisfied get an amp for it!!!

[MAXBUWAYA]

Back



Wire and my thumb



HU


Model #

[MAXBUWAYA]

toolights

I guess i just need some basic parts, you know nothing fancy, but nx for the suggestion.

Hope someone knows how to find the line for the rear speakers

[toolightz]

Ah OK: DIY
try to take a look of the colors ng wires ng rear speaker you will notice 2 or more colors from the RCA ex: red w white line or black with silver lines try to match it nalang to the rear speaker wires
if hindi efective you will be needing this:
extra wires from the HU to the rear speakers
tester
select the tester to 1k ohms then put the end of the extra wires to the negative or positive probe of the tester then point it to the positive terminal of the rear speaker, trace the RCA look where the needle of the tester reacts!

BTW:what speakers po ba iaad nyo? coax or seperates,watts ilan?
Some OEM HU can only produce about 10 to 15 watts baka maover load yung HU mo so you will needing an amp to power the extra speakers
hope this helps good luck

[nicolodeon]

Fafa Max, chorek observation ni toolightz: may "abang" ka pa para mag-dagdag. Kaso, yung wattage output ng HU mo ang problem fafy: adding two more might overload the unit which can lessen the service life of the unit.

However, I think your HU may have been design with the user adding an extra speaker or two in mind. Kasi, halos lahat naman ng HU eh geared for 4 speakers eh: front at rear. So, theoretically pwede ka pang magkabit ng 2x speakers. Here's the catch: modest lang yung wattage ng speakers na pwede mong idagdag, approx mga no more than 50w each. Provided na hinde mo ilalakas ng husto yung volume ng HU, I think workable 'to.

Now, Q is kung saan maganda ilagay sa Jimny ang extra two speaks, he he. Teka, saan ba ang posit nung OEM speaks dyan sa Jimny?

[MAXBUWAYA]

10cm space for extra speaker
Nicolodeon
Here is where i plan to put the speakers, I guess may abang on the housing of the speaker part, regarding sa HU I think meron kasi when i use the fader mode and choose rear, nawawala yung tunog dahil wala ngang speakers.
The stock speakers are at the front. am not sure of the size but the but sounds.. argh! Only your grandma can appreciate.

Toolights

Sana nga may abang ng wire for the rear, that I have to check.
Yung using the tester part, sounds tricky, but no choice but to try.

[nicolodeon]

Here is where i plan to put the speakers, I guess may abang on the housing of the speaker part, regarding sa HU I think meron kasi when i use the fader mode and choose rear, nawawala yung tunog dahil wala ngang speakers.

In that case eh may abang nga fafy. Hmm...10cm(?)...that would be around 3.9 inches. Tsk...maliit bossing pero I've seen 2-way speakers na ganyan and diameter/dimension. One of your options is to build a box na lang, one for each speaker and place it somewhere at the rear or under he seat. Mayron din nabibili speakers from Pioneer (3-way speakers) na may enclosure na, designed na ilagay/i-mount lang from anywhere. Small dimension to, around 10" in lenth, 5" in dept and around 6" in height with a 3-4" woofer, 2-3" mid at isang 1-1.4" tweeter. Decent sounding naman.

For your fronts, ayan ang pwede kang maglaro he he he. Measure mo lang yung dimension tas bile ka ng aftermarket speakers (yung 2-way na kung gusto mo) na gawa ng known brands tas ikaw na mag-kabit. Pretty easy to do. Just don't overdo the wattage thing, he he he. Sa size ng Jimny, mga 50-70w would do nicely na.

[toolightz]

hoping may abang sana! keep your finger cross
bout the tester thing madali lang yan pag pumalo yung needle that means may connectivity!
why add kasi,sa positioning ng abang eh masyadong mababa try to add a midbass nlng instead na coax! sayang lang
Sir nick is right ivest ka nalang sa front speakers seperates will do a lot or a 3 way seps place it on the door panels then yung" abang" place the midbass then the tweets on the dash! all powered by the HU muna! if not satisfied kuha ka na ng amp kahit mga bootleg V12's lang na 4 way para lumabas ang full potentials ng drivers mo! di pa mahihirapan yung HU mo!

Try to call this #7427836 look for lhorie tanong mo kung may stock pa sya na mga RF na seps na sale items, bigay mo nalang yung size dahil itatanong nya!!! lam ko may mga stock pa na 3's 5's na mids! She's from wintersnow * araneta,kapiligan tell her na nirefer kita sakanya tolits ng KAC
hope this help !