Avanza Engine Modification

[hans sebastian]

wala ko idea sir, di ako nakagtanong. kapag nakadaan ako inquire ko. yung ke chachoy n1 tahimik

sir ano headers nyo 4- 2- 1 or 4- 1? at san naka kabit ang sensor ?

[rbmjr_27]

sir ano headers nyo 4- 2- 1 or 4- 1? at san naka kabit ang sensor ?

sir, 4-1 try ko post picture this weekend

[rbmjr_27]

*hans sebastian:
sir, eto picture ng headers ko 4-1

[hans sebastian]

*hans sebastian:
sir, eto picture ng headers ko 4-1

bro natanong mo ba bat dyan naka kabit sensor mo? dapat kasi naka kabit yan sa 1 para nababasa nya lahat ng data sa 4 na labsan ng exaust mo... mas accurate kung dun naka tap yun ang alam ko

[kalelrvf]

^ Kalel ::: paps, sa may tomas morato extension malapit sa intersection ng going sa kamuning at e.rod meron akong nakikitang muffler land... try mo mag inquire. Pwede din sa kanila ang credit card kung short sa mola....

ah ok sir, thanks po sa info.... try no na lng pag napadaan ako sa part na yan... sana di mahal..

More power... God bless...

[meledson]

bro natanong mo ba bat dyan naka kabit sensor mo? dapat kasi naka kabit yan sa 1 para nababasa nya lahat ng data sa 4 na labsan ng exaust mo... mas accurate kung dun naka tap yun ang alam ko

iyong OEM, 1 lang na naka monitor sa O2 sensor na iyan.

[arki69]

hello ... greetings from Indonesia

I hope that all colleagues would not mind sharing with me.

I have Avanza G 1.3 VVT-I, and I did not make many changes on my machine, just add a CAI (cold water injection), VS (volt stabilizer) and Oil Catch Tank (OCT). I make a CAI with a cost of approximately $ 70, $ 25 and stabliser volt OCT around $ 7.

I installed the CAI was to cover the shortage Avanza engine is weak in the run-down

here's the pic









regards



*PS : thank's to xda2jojo to inform this great forum to me

sir, is CAI (cold air intake) similar to KHAOS turbo charger since the principle is the same to let fresh air into manifold? just asking sir..and how much this gadget (CAI) cost is it available here in the philippines? since i'd like to boost the power of my vanzy 1.3...thanks and more power sir

[jaspi11]

140kph for a 1.3 engine with 7 passengers without mods is not bad. mahirap naman masyado pwersahin engine natin...just my opinion

[jopsiawe]

greetings! meron na bang local dealer ng vortec drop in filter dito? or may k&n filter na ba para sa avanza?

[jaspi11]

c ngarcia alam ko sa abroad pa sya umorder......ang nilalagay ng iba ngayon dito sa club yung de tubo from freemuff sa san juan

[ngarcia]

c ngarcia alam ko sa abroad pa sya umorder......ang nilalagay ng iba ngayon dito sa club yung de tubo from freemuff sa san juan

tagal na din akong di nag-order. naka-ipon lang ako ng makakasabay umorder sa malaysia last year.

[jaspi11]

tagal na din akong di nag-order. naka-ipon lang ako ng makakasabay umorder sa malaysia last year.

kumusta naman yung performance ng air filter mo? nalilinis ba talaga kapag hinugasan?as in tanggal ang itim-itim.

[jopsiawe]

c ngarcia alam ko sa abroad pa sya umorder......ang nilalagay ng iba ngayon dito sa club yung de tubo from freemuff sa san juan

thanks sir sa reply, ask ko lang gaano katagal kaya mag pagawa ng de-tubo? dito ako baguio, di ko lang alam kung meron dito kasi.

[mikibabs]

sir jaspi, am also using the Vortec Eco-filter drop-in air filter same as sir ngarcia, di ko pa na try sa akin wash with soap and water kasi di pa naman maitim yung filter seldom used lang kasi si vanzy (average 3 days in a month lang and bought the filter last august 2009). gamit ko lang pang linis is air compressor so far tanggal naman mga dumi and filter looks new again and ganda hatak ni vanzy after cleaning

[jaspi11]

thanks sir sa reply, ask ko lang gaano katagal kaya mag pagawa ng de-tubo? dito ako baguio, di ko lang alam kung meron dito kasi.

dont know kung meron na silang naka ready. try mo i PM sina nencilla or werty.

[taptap]

thanks sir sa reply, ask ko lang gaano katagal kaya mag pagawa ng de-tubo? dito ako baguio, di ko lang alam kung meron dito kasi.

You might want to check hurricane air filter (stainless steel filter), restriction is low (but looking on the material, it might have a downside on the filtration).

[jopsiawe]

dont know kung meron na silang naka ready. try mo i PM sina nencilla or werty.

sige sir

You might want to check hurricane air filter (stainless steel filter), restriction is low (but looking on the material, it might have a downside on the filtration).

thanks sir, nakita ko yung video sa youtube, meron na kaya dito sa pinas?
May naka try na ba nitong brand?

Mas partial kasi ako sa drop-in filter

[jaspi11]

sir jaspi, am also using the Vortec Eco-filter drop-in air filter same as sir ngarcia, di ko pa na try sa akin wash with soap and water kasi di pa naman maitim yung filter seldom used lang kasi si vanzy (average 3 days in a month lang and bought the filter last august 2009). gamit ko lang pang linis is air compressor so far tanggal naman mga dumi and filter looks new again and ganda hatak ni vanzy after cleaning

ako yung original na pang casa pa din gamit ko, pag sobrang itim na at di ko na makuha sa pagbuga ng compresor pinapalitan ko na mahigit 300 pesos ang isa sa casa.magkano nga ang score nyo dyan sa vortec eco-filter nyo?

[mikibabs]

sir jaspi bought mine thru ebay from malaysia for $28 + $13 shipping, unfortunately was not expecting yung customs and local courier would cost another P1,376 pero performance wise very satisfied

[taptap]

sige sir



thanks sir, nakita ko yung video sa youtube, meron na kaya dito sa pinas?
May naka try na ba nitong brand?

Mas partial kasi ako sa drop-in filter

Yes Im using it (drop-in hurricane air filter). All I can say is... I got my money's worth...and I love the increase in torque (although I gonna watch out my engine oil as there could be downside on the filtration).

I got mine from the local distributor last week (www.hurricaneairfilters.com)...free shipping daw sila but I got mine directly from their shop (malapit lang sa amin ung shop nila).
...and I think my FC will improve in the coming weeks.

next project:
1. mandrel-bent 4-2-1 headers
2. alcohol injection or piggyback ECU

:D