Rust proofing after drilling holes

[D3nb3r]

Good day,
I'm planning to drill a couple of holes on my car to accommodate some mods. Ano po ba ang magandang gamitin na rust proofing paint to cover the bare metal? pwede na po ba yung Bosny Undercoat Rubberized or the VHT epoxy paint? both are aerosols btw. TIA

[Noel Salisipan]

Good day,
I'm planning to drill a couple of holes on my car to accommodate some mods. Ano po ba ang magandang gamitin na rust proofing paint to cover the bare metal? pwede na po ba yung Bosny Undercoat Rubberized or the VHT epoxy paint? both are aerosols btw. TIA

Screw/bolt sealant kagaya ng loctite para mas kumportable ka sa rush proofing. Pero hindo pa rin ganun kagarantisado na hindi kakalawangin.

Kung hindi talaga maiiwasan ang drilling, pwedeng combination ng plano mo na paint protection at yung screw sealant.

[D3nb3r]

Screw/bolt sealant kagaya ng loctite para mas kumportable ka sa rush proofing. Pero hindo pa rin ganun kagarantisado na hindi kakalawangin.

Kung hindi talaga maiiwasan ang drilling, pwedeng combination ng plano mo na paint protection at yung screw sealant.

Thanks for that feedback. I'm still gathering infos on what paint to use and i'm afraid I have no other way to do it but to drill holes since I have to pass some wires into the holes and put a grommit or a small cable gland.

[Noel Salisipan]

Thanks for that feedback. I'm still gathering infos on what paint to use and i'm afraid I have no other way to do it but to drill holes since I have to pass some wires into the holes and put a grommit or a small cable gland.

Kung wire lang isusuot mo baka may ibang pwedeng daanan yan instead na magbutas ka?
May mga expert sa lusutan ng wire lalo na kung sa gawing firewall padadaanin or sa underchasis.

Nakita ko yung mga wiring line nung nagkabit ng busina at reverse cam ko, may mga nilusutan lang within that part. Ask ka ng advice sa mga electrician!

[D3nb3r]

Kung wire lang isusuot mo baka may ibang pwedeng daanan yan instead na magbutas ka?
May mga expert sa lusutan ng wire lalo na kung sa gawing firewall padadaanin or sa underchasis.

Nakita ko yung mga wiring line nung nagkabit ng busina at reverse cam ko, may mga nilusutan lang within that part. Ask ka ng advice sa mga electrician!

yes sir, Luckily naka download ako nang technical manuals for my car sa isang forum. As per manual, yung mga wiring harness from the tailgate goes thru the chassis then up into the main cabin. I will try if I can poke the cam wires into the hole where the harness passes. If not, then last option ko na yung pag butas sa cabin floor. But I still have to drill holes pa rin pala for the camera mounting.

I hope hindi ako OT dito.

[Noel Salisipan]

yes sir, Luckily naka download ako nang technical manuals for my car sa isang forum. As per manual, yung mga wiring harness from the tailgate goes thru the chassis then up into the main cabin. I will try if I can poke the cam wires into the hole where the harness passes. If not, then last option ko na yung pag butas sa cabin floor. But I still have to drill holes pa rin pala for the camera mounting.

I hope hindi ako OT dito.

Ok yan bro, think more than twice then research bago ka mag-drill sa car lalo na kung under waranty pa yan.

May mga daanan talaga yan kahit sa likod papuntang rear compartment then gapang sa gilid at papuntang harap/engine compartment.