Question naman po. Ano pong pwedeng pantanggal nung acid na ginagamit sa macroetching? Natatanggal panrin po kase yung paint around sa area na nilagyan nung nagpamacroetching. Salamat po!
Sent from my iPhone using Tapatalk
The Largest Car Forum in the Philippines
- Forums
- Discussions
- Events
- Community
Results 1 to 6 of 6
-
Verified Tsikot Member
- Join Date
- Sep 2005
- Posts
- 36
April 21st, 2018 09:30 AM #1
-
Verified Tsikot Member
- Join Date
- Jun 2004
- Posts
- 1,311
April 21st, 2018 09:52 AM #2Sorry not really sure but you could try baking soda mixed with water.
Originally Posted by roxy_gurl
Or lots of water and soap.
-
Tsikoteer
- Join Date
- Mar 2008
- Posts
- 54,623
April 21st, 2018 11:32 AM #3lots of water. Originally Posted by roxy_gurl
but even then, expect some more paint to peel off afterward.
what i do, is manually peel off as much paint as i can, using a small metal brush even, to make sure no acid remains. i then wash well with water, dry it well, and then cover the exposed metal with some regular paint, to prevent rusting.Last edited by dr. d; April 21st, 2018 at 11:37 AM.
-
Verified Tsikot Member
- Join Date
- Sep 2005
- Posts
- 36
April 22nd, 2018 03:43 PM #4Thank you!
Can i Use WD40? Eto po sinasuggest saken sa ace.
Sent from my iPhone using Tapatalk
-
Verified Tsikot Member
- Join Date
- Apr 2018
- Posts
- 18
-
Tsikoteer
- Join Date
- Mar 2008
- Posts
- 54,623
April 22nd, 2018 11:05 PM #6to remove the etching liquid? Originally Posted by roxy_gurl
plain water only!
lots of it!
we just have to wash off the acid.
ace would probably recommend plain water, if they think they can sell you some.
heh heh.Last edited by dr. d; April 22nd, 2018 at 11:10 PM.
Reply With Quote
Originally Posted by roxy_gurl
