Results 1 to 10 of 12
-
January 23rd, 2011 08:12 PM #1
Guys help!
share ko lang: Kanina masaya pa ako dahil hindi na umulan, hinugasan ko yung kotse then makikita ko nalang pag banlaw ko ng dumi ng ulan may mga pintura maliliit.. tinanong ko mga tambay sabi nila may nag hahalo daw ng pintura sa kapitbahay sa 3rd floor ayun may mga nadala ng hangin mga patak dumikit sa pintura ng kotse.. itsura po madaming maliliit pong pintura dumikit na marami...
halos araw araw ka maglilinis ng sasakyan tapos ganun nalang mangyayari..
bad trip talaga pag wala kang garahe!
help po.. TIA!
-
-
-
January 23rd, 2011 09:55 PM #4
ung 3m scratch remover, nakakatangay din ng unnecessary paint residue, tiyagan nga lang sa pagkuskos for sure mawawala yan..
-
January 23rd, 2011 10:51 PM #5
*sirjmpet626..
meron ba nan sa Ace hardware or sa blade?
pano ba process? dapat wax or wash agad after clay bar?
*sirrenzo..
pag naulit pag sasabihhan ko/..
hindi kasi water proof yung cover namin kaya naalis pag umuulan... and hindi ko din kasi cocove pag hindi malinis, dapat car wash ko muna bago takpan, ayun overnight wala cover...
*sirzap..
thanks, try ko din yan paghindi nakuha sa clay bar..
pati sa mga glass meron badtrip..
-
Tsikoteer
- Join Date
- Aug 2008
- Posts
- 965
January 24th, 2011 12:15 AM #6Agree with jmpet, claying should be able to remove that - get to it as soon as possible, before the paint sets. I think you can buy the Mother's claying kit from Blade. Wash your car first, then use the clay to remove the paint droplets (make sure the surface is well lubricated - the Mother's set contains a QD that you can use, or you can also use water mixed with car shampoo). Also, claying will remove any wax or sealant you have in that area, so wash the car again afterwards, then wax. Good luck!
-
January 24th, 2011 01:32 AM #7
alamin mo muna if latex or enamel yung ginamit na paint. kung latex lang yan madali yan tangalin.
-
-
-
January 24th, 2011 01:02 PM #10
Puwede i try, 1. Palit air filter 2. Linis throttle body 3. Linis MAF sensor 4. Check spark...
high idle RPM at engine start