fiberglass ratio

**magilos** · January 7th, 2006 12:03 AM

guys tulong naman nagexperiment kasi ako ng fiberglass di ko alam ilan ang ratio ng resin at hardener yung tipong mabilis matuyo at matibay. Tnx in Advance

**StraightSix** · January 7th, 2006 01:44 AM

Yung nabili kong FastGlas kit, 2%-3% na hardener ang recommendation niya, which takes approx. 20 minutes for the mould to harden enough to keep its shape.

**gwapito69** · January 7th, 2006 04:15 AM

kadalasan e mga 10% ang hardener

**ineedmorehp** · January 7th, 2006 09:21 AM

San ba pwede matutunan fiberglass and/or cf moulding?

**gwapito69** · January 7th, 2006 10:04 AM

sa internet maraming DIY about fiberglassing and/or cf

**ineedmorehp** · January 7th, 2006 11:29 AM

Originally Posted by gwapito69

sa internet maraming DIY about fiberglassing and/or cf

Nde... yun dito na hands-on training or seminar of some sort.

**gwapito69** · January 7th, 2006 12:11 PM

try mo sa mga vocational schools baka dun meron auto body repair training

**ILuvDetailing** · January 7th, 2006 12:19 PM

DIY na lang pre, trial and error lang naman yan... madaming articles niyan sa web.

AC · January 7th, 2006 02:56 PM

btw.. bakit po pag bumibili ako fiber glass resin.. puti? while yung sa nakikita ko binebenta sa banawe.. itim yung finished products?

tinintahan lang po ba ito? or they are using cheaper materials?

ano po advantage? disadvantages?

thesis ko po kasi dati.. composites using coconut husk compared to traditional fiberglass..

ang titibay

but yung chin dati ng car ko.. na gawa "daw" sa fiber glass.. itim ang material.. ang rupok.. nasabit ko durog eh.. hehe parang masilya lang ginawa yung chin?