Results 1 to 10 of 11
-
August 12th, 2005 05:03 PM #1
Gusto ko sana magpafabricate ng door mouldings, mga magkano estimate ng ganito?
Yung local wala eh (white car)
-
August 13th, 2005 01:54 AM #2
bosing hindi ata fiberglass ang molding na ganyan e ang pagkakaalam ko rubber sya bosing. tsaka you can buy them at the dealer o kaya sa mga parts store.
-
August 13th, 2005 03:18 AM #3
gwapito, di yata avail sa pinas dealership yung molding. Baliktad talga, sa US ina-alis yan, sa Pinas gusto nila yan.
pero baka available sa auto store yung non-OEM rubber molding na iyan.
-
August 13th, 2005 03:39 AM #4
oo nga e.. kasi ako tinanggal ko yung sa isang oto ko e kasi ayaw ko. pero just buy any molding tapos papinturahan mo na lang pagkatapos ikabit para oks...
-
Verified Tsikot Member
- Join Date
- Jun 2005
- Posts
- 20
August 14th, 2005 07:29 PM #5MAS MAGANDA WALANG DOOR MOULDINGS
pero kung gusto mo talaga pwede ka bumili ng surplus or replacement door mouldings na medyo kasukat ng sa car nyo
-
August 14th, 2005 09:26 PM #6
there are mouldings that look like crap pero meron naman na bagay e. i cant imagine not having the door mouldings on my bimmer..pero dpat body colored
-
August 15th, 2005 12:59 PM #7
sorry theveed maki ride na ako sa thread na to, kasi i am having my car repainted (white). iniisip ko kung gawin ko flat black yung door moulding kasi pina flat black ko na din yung door handle. Tapos yung yung pingakakabitan ng side mirror (i don't know what you call it) flat black din. Pero yung side housing ng side mirror mirror body color. Ok ba or body color na lang yung door moulding?
theveed, kung magpapalagay ka ng door moulding papa body color mo ba or black just like the black handle ng white car mo?
-
August 15th, 2005 01:10 PM #8
theveed... sorry nakalimutan ko sukatin ung sa 323. mamyang gabi susukatin ko na.
-
August 15th, 2005 01:22 PM #9
gwapito69: Yes, rubber sya, but wala dito nyan kasi
Karding: Depende rin kasi sa oto, the Altima, like the City, looks better with moldings coz the sides are too bland. Walang sharp cut bend like Mazda, Civics etc.
cli4d: As above... For the Altima, mas gusto ko meron... Yes tama ka, nagask ako around kanila A-Toy, Options etc they all said mas logical for find a set ng moldings na kakasya sa car na galing sa ibang car... Mababasag/crack lang kung fiberglass.
ownertype: Chrome po door handles ko eh, so di bagay kung black frame. Papablack ko lang yung pillars between the doors pagpapahilamos ko na kay Zinggoy. But I'm thinking of leaving the side mirrors black though... Mga moldings, depende siguro sa makukuha kong surplus from another car... Kung matino na sya black lang, I'd stick with black, maganda contrast ng black/white eh.
M2: hehe, no prob pre :D Salamat in advance!
-
August 15th, 2005 01:29 PM #10
theveed - is it not an option to just get the part numbers for the usdm altima moldings and just have your bodyshop figure out how to install it? it's not easy bec. afaik the body of the car is recessed/grooved to hold the moldings so baka weird ang labas
ownertype - kung sa akin lang, i'll leave them body colored. i've seen many cars where they had a different color for the moldings/mirrors and imo they looked ugly (except yung mga nagpa-chrome)
Puwede i try, 1. Palit air filter 2. Linis throttle body 3. Linis MAF sensor 4. Check spark...
high idle RPM at engine start