Hello mga tols and tals, heheh, kakatapos ko lang i-detail 'tong Toyota Paseo ng tito ko, wala lang, just wanted to share dito since this site seems to be the most active Pinoy auto forum, and para na rin magsilbing tips sa ibang detailers dito. Medyo nahirapan din ako kase na-underestimate ko yung time, tsaka masyadong malala yung kondisyon ng paint, akala ko nga mga 6-8 hours lang ang aabutin para tanggalin yung mga swirls at pagka-oxidize, and before I could apply the AIO kase it generally takes me a total of 4 hours to do the main job… it took a while before mai-restore ko yung paint. I spent very long time on SSR2.5 and SSR1…
detailing tools:
- Porter Cable 7424
- yellow, orange, blue, and white polishing foam pads
- PoorBoy's SSR2.5
- PoorBoy's SSR1
- Klasse AllInOne
- Klasse Sealant Glaze
- Mother's Clay Bar
- Mother's Lubricant
- water spray bottle
- Forever Black
- Auto Glym
- Absorber
- Zip carwash
- Micro Fiber towels
- Eagle One tire shine
- applicator
detailed procedure:
- wash
- clayed
- wash
- wipe with the Absorber
- dry with MF towels
- applied AutoGlym throughout the interior
- SSR 2.5 on yellow pad PC set on speed 4
- pressure spray the yellow pad with water and dried
- immediately switched to orange pad (spent ~10-15 minutes per 2 sq ft)
- as the SSR2.5 dries/hazes I’d spray very little water so I’d be able to work it longer
- pressure spray the orange pad with water and dried
- polished with white pad
- SSR1 on orange pad PC set to speed 4, spread the polish to certain area, adjust PC to speed 6
- pressure sprayed the orange pad with water and dried
- polish with white pad
- pressure sprayed the white pad with water and dried
- applied Klasse AIO
- applied Klasse Sealant Glaze after 8 hours
- applied another coat of Klasse Sealant Glaze after 24 hours
- Eagle One tire shine
on to the pics,
BEFORE:
The Largest Car Forum in the Philippines
- Forums
- Discussions
- Events
- Community
Results 1 to 20 of 49
-
Tsikot Member Rank 2
- Join Date
- Aug 2006
- Posts
- 473
August 23rd, 2006 01:04 PM #1
-
Tsikot Member Rank 2
- Join Date
- Aug 2006
- Posts
- 473
-
Tsikot Member Rank 2
- Join Date
- Aug 2006
- Posts
- 473
August 23rd, 2006 01:14 PM #3FINISHED PRODUCT:
any comments and questions just post...
Thanks for lookin'
Joven
-
Tsikot Member Rank 2
- Join Date
- Aug 2006
- Posts
- 473
August 23rd, 2006 01:19 PM #4sorry for the pics, camera sucks, it's much shinnier and more reflective in person...
-
UST ENT-HNS
- Join Date
- Oct 2002
- Posts
- 22,658
August 23rd, 2006 01:21 PM #5Nice work!
Sayang hindi na nahabol yung mga thinning paint surfaces.
But whatta difference!
http://docotep.multiply.com/
Need an Ambulance? We sell Zic Brand Oils and Lubricants. Please PM me.
-
David Tong
- Join Date
- Oct 2002
- Posts
- 13,415
August 23rd, 2006 01:24 PM #6Gotta love transforming non-clearcoated red paints... hehe had a good time cleaning the pads/towels afterwards? :D
Good job
-
The Centurion
- Join Date
- Jan 2004
- Posts
- 2,329
-
dehadista
- Join Date
- Jan 2005
- Posts
- 3,231
August 23rd, 2006 01:36 PM #8very nice before and after! tagal talaga kasi PC gamit.. pero sure na safe ka dun. kung Rotary mahirap na.. small margin for error.
hehe kita ko yung pads mo nakapatong sa windshield.. grabe na kasi oxidized ang paint nyan. matindi na dead paint.. kitang-kita na sa pads.
keep up the good work bro.
-
UST ENT-HNS
- Join Date
- Oct 2002
- Posts
- 22,658
August 23rd, 2006 01:37 PM #9Akala ko alloy wheels, nagoyo ako nun, ha. hehehe.
http://docotep.multiply.com/
Need an Ambulance? We sell Zic Brand Oils and Lubricants. Please PM me.
-
Bagong Bayani
- Join Date
- Oct 2002
- Posts
- 796
August 23rd, 2006 01:46 PM #10Kintab a! Sarap ng feeling pagkatapos mo gawin yan. Major accomplishment lalo pag nakikita mo outcome ng trabaho mo.
Might want to clean the wheel wells also para dagdag pogi points.
Ganda talaga ng pula! :cool01:Last edited by kupaloids; August 23rd, 2006 at 01:48 PM.
-
The Centurion
- Join Date
- Jan 2004
- Posts
- 2,329
August 23rd, 2006 01:50 PM #11ahh. ngayon ko lang napag-tanto, kaya pala halos walang pinagkaiba yung before and after kapag nagdedetail ako kasi nga naman, alaga yung sasakyan namin. ang napansin ko lang kasi, nawawala lang yung kintab, kaya kahit i 3 step method ko, nagiging deep-gloss lang sya...
*kupaloids, tama ka. masayang-masaya ako kapag nagdedetail at nakikita ko yung pinaghihirapan ko, hinahangaan nang iba...
-
Tsikot Member Rank 2
- Join Date
- Aug 2006
- Posts
- 473
August 23rd, 2006 01:58 PM #12thanks! oo nga eh, Toyota sucks for not clear coating pre-94's with flat colors like red, black, etc...
Originally Posted by OTEP
lol, yeah, red cars ftw! LOL I just had to pressure spray the foam pads and applicators to clean them, just don't let the abbrassives dry out before doing that, put the pads on the PC turned on to speed 6, then it's ready to be used again after five minutes... that easy... Originally Posted by theveed
Gotta love transforming non-clearcoated red paints... hehe had a good time cleaning the pads/towels afterwards? :D
Good job
yups, I don't have access to a Rotary, kinelangan ko hugasan yung pads every ~hour... may pagkadelikado din yung rotary lalo na kung wala ka masyasdo experience, baka mascratch mo lalo yung paint and expose the primer, lol. Originally Posted by dehadista
very nice before and after! tagal talaga kasi PC gamit.. pero sure na safe ka dun. kung Rotary mahirap na.. small margin for error.
hehe kita ko yung pads mo nakapatong sa windshield.. grabe na kasi oxidized ang paint nyan. matindi na dead paint.. kitang-kita na sa pads.
keep up the good work bro.
hwag na, tito ko naman nagdadrive nito eh, lol... Originally Posted by kupaloids
actually, nag-volunteer ako i-detail yung kotse niya hndi lang para pakintabin kundi para lagyan na rin ng layers of protection... Makintab na siya after SSR1, but then I wanted to apply Klasse SG for protection... Originally Posted by ian_rex
thanks thanks everyone
-
Tsikot Member Rank 2
- Join Date
- Aug 2006
- Posts
- 473
-
Tsikot Member Rank 4
- Join Date
- Jun 2003
- Posts
- 1,961
August 23rd, 2006 02:02 PM #14put up pix of arms and biceps before and after too
i'm sure detailing is also a hell of workout! whew
-
Tsikot Master Lurker
- Join Date
- Aug 2005
- Posts
- 1,013
August 23rd, 2006 02:02 PM #15galing! nabuhay pa ulit yung paint. ano sabi ng uncle mo? dapat weekly mo na yan gawin. hehe...
great job!
-
3.14159265
- Join Date
- Aug 2004
- Posts
- 6,234
-
Bagong Bayani
- Join Date
- Oct 2002
- Posts
- 796
August 23rd, 2006 02:10 PM #17Weekly!? Baka white o gray na yun after a month. Ubos na kulay Originally Posted by NazQ
galing! nabuhay pa ulit yung paint. ano sabi ng uncle mo? dapat weekly mo na yan gawin. hehe...
great job!
-
Tsikot Member Rank 2
- Join Date
- Aug 2006
- Posts
- 473
August 23rd, 2006 02:15 PM #18hahahh, :rockon: nakakasakit ng mga braso tol Originally Posted by cardo
put up pix of arms and biceps before and after too
i'm sure detailing is also a hell of workout! whew
haha, binabayaran ako pero hndi ko tinanggap, tapos gusto pa iuwi ko din yung isa niya pang kotse para isunod ko daw, lol... weekly? hhmm not unless I make it a sideline, lol, get me customers I might, lol... Originally Posted by NazQ
galing! nabuhay pa ulit yung paint. ano sabi ng uncle mo? dapat weekly mo na yan gawin. hehe...
great job!
yeah don't give up on it! Originally Posted by SeminaristaKuno
Nice work!
May pag-asa pa pala oto ko hehehehe
-
Tsikoteer
- Join Date
- Apr 2004
- Posts
- 11,913
-
Tsikoteer
- Join Date
- Nov 2002
- Posts
- 1,220
Reply With Quote
Originally Posted by OTEP
