Results 1 to 7 of 7
-
October 4th, 2004 09:25 PM #1
Boss pinunturahan ko yung hood ko nang anzahl.
Ano ba magandang ipangbuff dito?
After a week ba pwede nang ibuff?
Yung step 1 and 2 nang meguirs pwed bang gamitin yun?
Gusto ko sana wag nang lihain nang 1200, pwede ba?
Please advise naman DIY lang kasi eh. Try ko lang.
Salamat po.
-
October 5th, 2004 11:30 AM #2
Any compound can be used, quality of finish varies with skill and product combo. 3M is a good choice.
After a week? depends on how the paint was mixed, usually yes.
Meg Power Cleaner would work, but I'd take Diamond Cut instead followed by DACP.
You dont have to sand, but expect a lot of orange peel on the surface, you can just sand with 1500 then 2000 for a glassy finish.
-
October 6th, 2004 05:46 PM #3
Sir theveed;
What do u think mas maganda ba na ako na lang tumira or patira sa iba?
Mga how much kaya yung labor nun?
Saan kaya maganda pagawa?
Gaano ba dapat katagal para safe ang pintura? Sensya na nagsisimula pa lang DIY kasi eh.
Thanks.
-
October 6th, 2004 06:48 PM #4
question lang ulit pwede ba by hand na lang or kailangan talaga machine?
Pwede na ba yung BnD k600?
-
October 6th, 2004 06:55 PM #5
sa akin kasi noon anzahl paint then used 3M buffing compound ang pinang-buff electric drill with buff attachment. ok naman naging resulta. mas ok cguro kung yung BnD 600 gagamitin mo with proper buff attachment.
-
October 6th, 2004 07:31 PM #6
There aint no way the KP600 will be able to handle this job, it's close to being a weak hand that doesn't get tired.
Clavel: I can't answer any of your questions since I have no clue as to your skills and knowledge with this subject, so my logical advice is ask paint shops for quotations.
-
mikel arteta coat 2023 williamjacket
Verifpro - paypal, ebay, banks, crypto, docs and...