malayo bro.. pero ok na fiberglass basta magaling gumawa.. kung gusto mo the best talaga atoy ka na mahal nga lang :D
malayo bro.. pero ok na fiberglass basta magaling gumawa.. kung gusto mo the best talaga atoy ka na mahal nga lang :D
ah ganun, magkano ba sa a-toy? example simple chin lang...Originally Posted by odell
yup, mahal ata sa a-toy pero sulit naman. kung mapera ka a-toy ka na. madalas mo ata makikita works nila sa mga autshows.
ang quote ng OEM side skirts sakin pang galant VR was around 6500 for the pair sa CINCO. fiberglass copies would set you back around 3500.
hmm... ok lang naman ung price i guess kung sulit naman at maganda. question isa pa, would eyelids be ok or would it be too ricey? and can you diy eyelids?
West Ave. Going to Edsa about 50 meters past Del Monte and West Ave. traffic light on your left side. Black colored signboard.Originally Posted by blueboy91327
kahit gaanong kagaling yung fabricator, i wouldn't recommend fiberglass bodykits. napupunit kasi yan kapag nadadamage...and with the part so close to the ground it's only a matter of time before it takes some serious hits. da best talaga ang ABS plastic.
also, imo, bitin kung chin lang ang ilagay mo...parang nakadamit pero walang pantalon![]()
hahaha onga eh... pero gusto ko kasi modified ung harap but ayoko maging OA baka maging oa na pag may skirts pa. pero gaya nga ng sabi nyo panget...hehe bahala na. san naman nakakabili ng ABS plastic material ang gagamitin?Originally Posted by M54 Powered
i don't know where to source abs plastic in asia, unfortunately. usually the bigger international manufacturers (think Spoon, Mugen, TRD, etc) and the oem's all make their stuff in this material, if that helps. of course, malaki ang difference in price. here in the US, you can get a high-quality, 4 or 5-piece bodykit in abs plastic for a japanese compact car for $600-1000.
my apologies again for not knowing anything about the philippine market.
i don't think there are any oem's that make bumper parts or body cladding in fiberglass. puro plastic lahat. that should tell you a lot...
may bagong trend concerning kits.
FRP = Fiberglass Reinforced Plastic
supposedly 10X stronger and more flexible than fiberglass.
yun nga lang, ewan ko kung may supplier na din sa Pinas.
most of the time aftermarket ang fiberglass dito sa pinas. wala nga atang oem.