3M rubberized undercoat

[ssaloon]

san pwede bumili ng 1 can of 3M rubbgerized undercoat? mga magkano ito? san pwede magpaundercoat and magkano labor? tnx!

[GlennSter]

meron yata sina chieffy...

ami right chieffy?nag uundercoat kayo diba?

if the material itself lang...sa handyman or ace hardware...

nasa 900 plus yata...

[chieffy]

thanks boss Glenn

Underseal Rubberized Coating(3M) nga po ang dala namin...kung 'yung mismong material lang marami kayong mabibili niyan sa malalaking paint shops at sa mga nabanggit ni boss Glenn...

OT: boss Glenn nakakatakot yung pwesto mo sa picture ng iyong signature 8O

[GlennSter]

sir chieffy...ahrhehrehrherh...konting katuwaan lang po sa off roading session namin...ehrherhehrher

pinag iisipan ko pa kung magpapa undercoat ako eh...haaaayyy...dumi ng ilalim ko...wala pang moolah...ehrherhehr

[kimpOy]

680 pesos lang s akin kaso sa pampanga pa ako ehj

[benny010]

mahal pala yung nakuha ko sa Petron, Pasong Tamo... :twisted:
P1900 sa revo last year Sept...
:twisted:

[ssaloon]

600 - 800 yung can, pero maghahanap ka pa ng gagawa... babayaran mo pa yung labor.

yung 1.9k ata inclusive of underwash na yan eh

[ranel211]

ssaloon,

kay chieffy ka na lang mga 1900 din yata, one thing for sure may libreng kuwento at enjoy ka pa............

[benny010]

yap yung P1900 may kasamang underwash at free vacuum 8)

actually wala akong plano magpa-undercoat... underwash lang...
after that nakita ko tangal na yung itim na pang-ilalim ko... so tinuloy ko na yung undercoat...

[ssaloon]

pag nagparepaint ka ng car (hilamos), may bagong rustproofing/undercoat na yun?

[chieffy]

ssaloon, wala unless may agreement kayo ng bnp shop...meron isang bnp shop dito sa sta. ana sa amin nagpapa-undercoat...wala kasi siyang lifter...

[Bossing]

try sika or wurth undercoat better than 3m but more expensive oem to ng most european cars

[jayz]

Any comment regarding sa brand na Dynatron (not sure sa spelling) but it costs around P650/gallon sa Ace Hardware? Thanks!

[RC-V]

whats 3m rubberized undercoat? is it like rustproofing?

[chieffy]

Underseal Rubberized Undercoat by 3M is the material used to rustproof the underside of vehicles. It is a vscous rubberized coating, sprayable and fast drying that forms into a tough flexible film. It has good abrasion resistance compared with wax-based coating(i think Dynatron is wax-based...pls correct me if i'm wrong). It will not flow or sag in temperature as high as 300 F. It also offers excellent resistance to rust and corrosion as it provides a continuous film free of pores.

[afrasay]

chieffy:::when applying undercoat do you include the muffler, shocks and the rods/stabilizers?. The shell station here applied undercoat to all, including the once I mention above, underchassis. Is this a good practice? BTW, I will visit your shop one of these days for an undercoat service.

[Jimbob]

try sika or wurth undercoat better than 3m but more expensive oem to ng most european cars

bossing, saan pwede makabili ng wurth undercoating, ang maganda kasi sa wurth, medyo matte yung finish niya eh, pero tagal na ko naghahanap, saan kaya meron?

[chieffy]

sir afrasay, di na namin sinasama ang muffler...matatanggal din naman kasi sayang lang yung material...it would be better to use high temp paint sa exhaust system...
we dont spray diluted undercoating sa rubber parts coz of the gasoline mixed with the material(Underseal Rubberized Coating by 3M)...text nyo lang po ako sir para ma-set natin appointment...para ba iyan sa bago niyong ride? :D

[ner]

Sir chieffy saan ba shop mo? Balak ko kasing mag pa undercoat at kung mag kano. BTW crosswind ride ko. tnx

[ner]

Sir chieffy saan ba shop mo? Balak ko kasing mag pa undercoat at kung mag kano. BTW crosswind ride ko. tnx