TOYOTA EMINA Overheating

[turbo]

Yong head gasket goes for 1.5 - 2k. Punta ka lang sa Evengelista, maraming lalapit sa iyo, isang hilera ng tindahan don, panay pagawaan ng head gasket.

Ang thermostat housing naman, tatanggalin mo at papalitan mo na lang ng plate na may tubo na kasya sa hose. Pumunta ka sa Banawe, maghanap ka ng radiator neck na sa hose ng radiator ang kabit. Usaully it comes from surplus NIssan diesels. mga 500 lng ang isa.

[Renault Manto]

Yong head gasket goes for 1.5 - 2k. Punta ka lang sa Evengelista, maraming lalapit sa iyo, isang hilera ng tindahan don, panay pagawaan ng head gasket.

Ang thermostat housing naman, tatanggalin mo at papalitan mo na lang ng plate na may tubo na kasya sa hose. Pumunta ka sa Banawe, maghanap ka ng radiator neck na sa hose ng radiator ang kabit. Usaully it comes from surplus NIssan diesels. mga 500 lng ang isa.

Thanks dude. BTW, i just learned that my emina is 3CT (a mechanic told me that it was based on the engine number) and that the thermostat was removed (well, disconnected lang).

If i have to replace the cylinder heads, they told me that there are available parts locally for a 3CT engine. Is that true guys? Help naman sa estimated cost.

Thanks!

[alwayz_yummy]

sir turbo, pardon ha..

how will i go to evanghelista and magpagawa ng headgasket na tinutukoy mo? i'll just bring my original? is it softer, thicker than my original? how many gaskets? wala po bang mabibiling pre-made na gasket katulad ng yang tinutukoy mo?

i've decided na kasi i-pabukas na sa mekaniko ko ung makina..to remove also the accumulated rust and sludge inside, crack test and replace my water pumpp..plus i'll have my engine ported and polished na din...pero i'm not give it oversized rings kasi baka lumaki ng sobra fuel consumption ko,e...