Bigla nawala yung lamig

**radz15** · February 19th, 2015 09:15 PM

Originally Posted by jasonub

Replace the evaporator. Welding is useless. Manipis na yan all over. It will spring another leak soon after you have it repaired. Call rotary supplier ng ac parts mura lang yan sa kanila. Brand new pa.

May number ka ba ng supplier ng mga aircon sir?. Along south area sana if possible. Thanks!

**jasonub** · February 20th, 2015 12:27 AM

Sa better living dona solidad meron rotary. Di ko lang alam number. Dami sila branches

**radz15** · February 20th, 2015 01:09 AM

Originally Posted by jasonub

Sa better living dona solidad meron rotary. Di ko lang alam number. Dami sila branches

Thanks sir! Try ko daanan bukas

**radz15** · February 20th, 2015 10:15 AM

Mahala ba talaga evaporator coil? Estimate kasi sakin 5-7k kumporme sa brand.

**jasonub** · February 20th, 2015 12:01 PM

Mura lang yan just ask for replacement wag orig. Which costs way more. 3500 sounds right

**dr. d** · February 20th, 2015 05:37 PM

the range of prices between OEM and replacement, is big. also, take note of the model design.. e.g., laminar versus serpentine (for sentra).when my sentra's evaporator sprung a leak for the first time after 9 years, i opted for replacement. the model i (my driver, actually, whom i asked to have it repaired) got, was the cheaper one (2K yata), as against the much more expensive OEM. well... i wasn't happy with the result. bitin ang lamig.., at nag-yeyelo, despite full charge. finally, i brought it back and had the evap replaced with the much more expensive (by 4-5 times) oem. that brought the cooling back to factory spec.. apparently, the replacement evap wasn't up to stuff.. mis-matched aircon component...

also, replacement evap sometimes does not fit right into the space. this was the case with my innova's front evaporator. it was cheaper by 80%, but it was wider by less than 3 mm, and it simply did not fit into the space provided.. i had no choice but to get the oem..

**jasonub** · February 20th, 2015 06:25 PM

YES choose serpentine. laminar hina ng lamig.

try mo eto

ROTARY better living 7768663

- - - - - - - - - - - - - - - - - - - - - -

YES choose serpentine. laminar hina ng lamig.

try mo eto

ROTARY better living 7768663

**radz15** · February 20th, 2015 01:40 PM

Currently at Ceejay's. Replacement evaporator lang binili ko worth 1.5k sa rotary. Yung sa Ceejay's kasi nasa 5-7k yung branded nila.

**radz15** · February 20th, 2015 06:47 PM

Thanks sa mga nagreply. My first choice is laminar which is more expensive. Sabi nila mas maganda daw yun at mas matibay. Kaso walang stock kaya nag serpentine ako.

Yun nga ang problema sa mga replacement naka tatlong balik ako dahil hindi fit sa housing.

So far super malamig sya at first time ko lamigin ng nanginginig sa sasakyan. Feeling ko mas malamig ngayon kesa nung una kong nilabas sa casa yung sasakyan.

Sabi sakin ng Ceejay's balik daw ako after 1 week para sa follow up check up.

**dr. d** · February 20th, 2015 06:57 PM

Originally Posted by radz15

Thanks sa mga nagreply. My first choice is laminar which is more expensive. Sabi nila mas maganda daw yun at mas matibay. Kaso walang stock kaya nag serpentine ako.

Yun nga ang problema sa mga replacement naka tatlong balik ako dahil hindi fit sa housing.

So far super malamig sya at first time ko lamigin ng nanginginig sa sasakyan. Feeling ko mas malamig ngayon kesa nung una kong nilabas sa casa yung sasakyan.

Sabi sakin ng Ceejay's balik daw ako after 1 week para sa follow up check up.

yung mas lumamig...
kung minsan, mas malamig na ngayon dahil hinablot ng trabajador yung aircon filter nyo!! check it po!
heh heh.