the white letters don't stick to the masking tape when you peel the tape off (naiiwan sa backing)...
anyway, use a sharp blade to separate the edge of the white portions from the backing and stick them to the masking tape as you carefully peel the tape off the backing.
then, with all the parts of the sticker on the tape, position the tape carefully onto the surface and wipe the tape firmly to make sure the sticker is stuck well to the surface. then, carefully peel off the masking tape, making sure the sticker remains secured to the surface.
kayang kaya idikit yung sticker nang hindi mami-misalign kahit isang letter, the trick is to lift just the edge of each white letter habang nakadikit pa yung letter na yun sa masking tape at backing, pag naka lift na yung edge ng kaunti, sasama na yung letter sa masking tape pag peel off nung tape
sa akin try ko tanggalin para ikabit yung sticker sa optra namin letter t pa lang hindi na sumama pero dun sa kabila nung sticker sumasama siya yung isa pang sticker ganun din letter t at s ang ayaw sumama kaya ayun hindi ko na dinikit better pagawa na lang sa Uyco sticker..Nakareserve naman ako ng orange dun..hehe..: )
Question lang po Bakit hindi po consistent ang line sa ibaba ng tsikot.com na sticker? Napansin ko kase yung isa mahaba hanggang letter t yung isa naman hanggang letter s naman..hehe..:D
nakabit ko na sticker ko.. yung line sa ilalim parang naging wavy kaya tinanggal ko na. hirap nung masking tape ginamit kaya dapat medyo maingat talaga sa pag kabit