bagong kabit na autmatic transmission

[valentin mario]

kapapalit ko lang ng matic transmission nung monday, ang makina ko is ga16 nissan eccs, and from ga15 na makina yung transmission na naikabit. ang pagkakaiba nila dun sa pwesto ng shifting cable nya, yung original na a/t ko sa ilalim dumaan yung cable, yung bago naman sa ibabaw, ang nangyari nung maikabit yung bago at itest drive na, nagkabaligtad yung kambyo, park - naging 1 (primera), reverse - naging drive.

any solution para maibalik sa normal, aside sa conversion nung kinabitan ng cable para dumaan uli sa ilalim. meron bang cable na pag hila mo paabante naman yung action niya sa kabilang dulo.

thanks.

[speedyfix]

why not just get the correct transmission for your car. it will be simpler.

[niky]

The cable routing should have absolutely no effect on the shift pattern... Sentra GA transmissions should be completely compatible (except for some minor differences in speedometers... electronic versus cable)... this is an issue of installation.

[bryant77]

The cable routing should have absolutely no effect on the shift pattern... Sentra GA transmissions should be completely compatible (except for some minor differences in speedometers... electronic versus cable)... this is an issue of installation.

+1 There's wrong with the installation.

[valentin mario]

sirs eto explanation kung bakit me effect yung cable routing (correct me if i'm wrong), lets say yung neutral asa horizontal yung placement nya, pag asa taas dumaan yung cable, pag shift ko ng drive, ang action ng cable is push diba so pababa yung tulak. kung asa ilalim naman dumaan yung cable, pagshift ko ng drive, action ng cable is push parin pero paitaas naman ang tulak.

diba me lever na nakattached dun sa transmission na kinabitan naman nung dulo ng cable, yung sa orig nya kasi is letter V yung itsura, yun naikabit kong transmission halos straight na. pwede ba itong tanggalin at pagpalititin na lang?

[niky]

Well, there's not much else you can try. Go ahead.