Bros
Yung clutch,Pressure, release bearing ba depende sa Makina? or sa transmission housing.
Like there are several Model vehicles share a common model of engine, does it follow ba na parehas lang ang clutch disk, pressure plate at release bearing gamit nila?
or depende tagala sa transmission? dapat pag same engine parehos din tranny nila ryt?
The Largest Car Forum in the Philippines
- Forums
- Discussions
- Events
- Community
Results 1 to 13 of 13
Hybrid View
-
Tsikot Member Rank 3
- Join Date
- Dec 2003
- Posts
- 546
February 25th, 2005 12:11 PM #1
-
Tsikoteer
- Join Date
- May 2004
- Posts
- 5,965
February 25th, 2005 12:16 PM #2pinaka maganda nyan,baba mo tranny mo...tapos palitan na kung manipis na..sayang sa labor...
pwede kasi pareho..pwedeng magkaiba...
-
UST ENT-HNS
- Join Date
- Oct 2002
- Posts
- 22,658
February 25th, 2005 11:28 PM #3Those parts vary with the transmission model.
http://docotep.multiply.com/
Need an Ambulance? We sell Zic Brand Oils and Lubricants. Please PM me.
-
Tsikot Member Rank 3
- Join Date
- Dec 2003
- Posts
- 546
February 26th, 2005 02:06 AM #4patay tayo dyan OTEP
heheheh 4x4 saken, paano kaya yun? sa tingin mo swak din yung Clutch pressure at Release bearing ng Besta sa R2 engine ko?
-
UST ENT-HNS
- Join Date
- Oct 2002
- Posts
- 22,658
February 26th, 2005 01:25 PM #5Kailangan mo muna ibaba iyan. Make sure na may ready supply of Korean parts nearby (e.g. Araneta Ave. and some parts of Banawe). :D
http://docotep.multiply.com/
Need an Ambulance? We sell Zic Brand Oils and Lubricants. Please PM me.
-
Tsikot Member Rank 3
- Join Date
- Dec 2003
- Posts
- 546
February 27th, 2005 12:41 PM #6tiningan ko sa internet, parehas sila ng B2200 E2200 na 22 spline salamat sa diyos hehhehe. may 23 spline din kasi na b2200
may clutch kit kasi, complete, tas sinabi kung san pwede na sasakyan, pwede sa b2200, e2200, ford pa ata tas yung saken ehehe
-
Tsikot Member Rank 3
- Join Date
- Mar 2003
- Posts
- 637
February 27th, 2005 10:30 PM #7OT:
tutal clutch na rin ang pinag uusapan kanina biglang nawala yung clutch ng van namin kapag inapakan mo naiiwan nakalubog yung pedal ano kaya problema nito? buti malapit palang dito sa amin nung nasira at nakauwi pa ng naka 1st gear lang kaso every stop namamatay then start ulit while in 1st gear sabay andar.
-
UST ENT-HNS
- Join Date
- Oct 2002
- Posts
- 22,658
February 28th, 2005 12:13 AM #8Baka naubusan ka ng clutch fluid or snapped ang clutch cable mo.
http://docotep.multiply.com/
Need an Ambulance? We sell Zic Brand Oils and Lubricants. Please PM me.
-
Tsikot Member Rank 3
- Join Date
- Mar 2003
- Posts
- 637
February 28th, 2005 12:32 AM #9kakasalin ko lang ng fluid bago umalis siguro nga yung cable hindi ko na kasi napatingnan 6pm kasi nangyari.
-
UST ENT-HNS
- Join Date
- Oct 2002
- Posts
- 22,658
February 28th, 2005 12:39 AM #10If may fluid, malamang wala nang cable iyan.
May leak siguro ang master cylinder or ang slave cylinder. Wala pang Php 300.00 ea yun.
http://docotep.multiply.com/
Need an Ambulance? We sell Zic Brand Oils and Lubricants. Please PM me.
-
Tsikot Member Rank 5
- Join Date
- Nov 2003
- Posts
- 3,848
February 28th, 2005 10:58 AM #11basta it matches up with the flywheel and the rest of the bolts ok na yan, pero it would be best to really get the clutch that is meant for your car
-
Tsikot Member Rank 3
- Join Date
- Mar 2003
- Posts
- 637
March 1st, 2005 12:41 AM #12hindi pala cable ang problema hindi ko alam kung anong tawag dito pero ito yung pinalitan malapit sa may transmission.
-
Tsikot Member Rank 3
- Join Date
- Dec 2003
- Posts
- 546
Reply With Quote