Results 11 to 20 of 24
-
February 16th, 2010 03:59 PM #11
Thanks for the video.
Indeed they are the correct positions, however you may not be able to adjust them to Fig1 because of adjustment limitations.
I currently use Fig2, but I try to approximate Fig1 as much as I can before the side mirror adjustment motors say "enough."
Before correct adjustment of the mirrors, the driver's seat has to also be correctly positioned also - as everything else will follow from there
-
February 16th, 2010 04:06 PM #12
used to do 2 and 5 until i read this somewhere years ago. works well esp my side mirrors are kinda small. it takes time to get used to not seeing your side, but never a problem anymore. and no more last minute "kabig" for nearly not seeing cars on the blind spots.
-
-
Verified Tsikot Member
- Join Date
- May 2009
- Posts
- 93
February 17th, 2010 07:29 PM #14Mga tsikoteers. Just by looking at the first picture, fig.1 and 4 is the correct positioning of side mirrors. But there is a catch because this is usually ideal in the states where motorist normally follows the road line. Here in the Philippines motorist normally use most of the time in between the road lines kaya minsan yung tatlong lane nagiging four or five lanes. Pinas talaga.
So the best is to set your side mirrors in between fig. 1&2 and Fig. 3&4. San ka pa lulugar nyan eh neutral ka na.
Happy motoring...
-
February 18th, 2010 09:37 AM #15
i remember from my driving school lesson, the instructor told me 10% of the mirror should reflect your car and the rest the road. i guess i'll try to follow figs 1 & 4 but will still leave some part of my car, konting-konti na lang. you also need to know where your car is in relation to the "outside world."
but blind areas don't just depend on the mirrors. when i use my van i almost never encounter blind areas, but when i'm using my sedan madalas meron. i guess it's because in the van i'm "up there."
-
February 18th, 2010 09:53 AM #16
Ah so I've been doing it correctly all this time
My side mirror adjustment never shows any part of the car.
I guess my old man was right!
-
Verified Tsikot Member
- Join Date
- Nov 2006
- Posts
- 13
February 18th, 2010 10:15 AM #17
-
February 18th, 2010 10:43 AM #18
I prefer not to mess with my rear-view mirrors (center and side), so I maintain them in positions where I can see the sides of my car.
For blind spots, I installed blind spot mirrors.
Best of both worlds!
This was taken in a hurry, though, it wasn't from the driver's POV kaya medyo mali ang posisyon.
Oh, and by the way, siyempre kasama na yung wide-view center rear view mirror sa upgrades.
[SIZE=1]18/3,711[/SIZE]Last edited by woohoo; February 18th, 2010 at 10:52 AM.
-
-
Verified Tsikot Member
- Join Date
- Jul 2004
- Posts
- 55
March 27th, 2010 10:25 AM #20i am not used to not seeing the sides of my car while driving. but it's true that the blind spots can be a problem. i just try to be alert at all times.
question: do you re-adjust the side mirrors from Fig 1 and 4 back to "normal" position when parking in reverse?
Choice I would have made as well.:nod:
2024 Innova Zenix 2.0 V CVT (non-HEV) vs Innova...