problem steering to the right

[jansky]

to all guru

i have a new problem with my car (nissan sentra b13)

just finish fixing the following

- Renew Steering Rack
-Renew Motor suport
-Convert motor support
- Camber alignment


now after fixing it i just notice when turning (full) to the right there is a little bit short in angle..

kasi sa lugar namin pag pauwi merong sharp curve na makukuha ng isang full turn ngayon hindi na kaya kailangang umatras ng kaunti para makapasok
any idea what's the culprit?

ipunta ko pa lang ulit this weekend sa shop na pinagpaayusan ko

TIA

[willvill]

to all guru

i have a new problem with my car (nissan sentra b13)

just finish fixing the following

- Renew Steering Rack
-Renew Motor suport
-Convert motor support
- Camber alignment


now after fixing it i just notice when turning (full) to the right there is a little bit short in angle..

kasi sa lugar namin pag pauwi merong sharp curve na makukuha ng isang full turn ngayon hindi na kaya kailangang umatras ng kaunti para makapasok
any idea what's the culprit?

ipunta ko pa lang ulit this weekend sa shop na pinagpaayusan ko

TIA

Ganyan din sa akin. After changing the ball joints and other joints pertaining to steering and after the wheel alignment, parang nagkulang sa turning of the wheel. Yund dati na madali kong ikutin, ngayun hindi na puede. Aatras pa ako and maneuver the wheel. Hindi ko pa rin nabalik sa talyer. Let's ask our fellow tsikoteers.

[jansky]

UP ko lang po

[technismo]

sir naka off center po ba yung steering nyo? pag straight ahead yung takbo?

[jansky]

sir naka off center po ba yung steering nyo? pag straight ahead yung takbo?

yes sir ni hindi tumatagilid kahit bitawan ko eh

[technismo]

yes sir ni hindi tumatagilid kahit bitawan ko eh

i mean sir yung steering wheel po? off center po?