Lowering

[richiegonzo]

Mga sirs, gusto ko magpa-lower ng kotse. Magkano pinaka murang set-up na ok naman ang performance? And also pls recommend shops na ok mag set up, fairview area po ako. Thanks!!!

[earthlyken]

it really depends how you like to be lowered, like how many finger gaps you like.

for starter..try purchasing lowering springs for your ride then try to see if the ride height suits you, if not try adding lifter until your satisfied with the height..

HTH

Mga sirs, gusto ko magpa-lower ng kotse. Magkano pinaka murang set-up na ok naman ang performance? And also pls recommend shops na ok mag set up, fairview area po ako. Thanks!!!

[ghosthunter]

How low do you want to go? How stiff a ride can you accept for your car? What purpose do you have in lowering? Track performance or Street looks?

[1D4LV]

Mga sirs, gusto ko magpa-lower ng kotse. Magkano pinaka murang set-up na ok naman ang performance? And also pls recommend shops na ok mag set up, fairview area po ako. Thanks!!!

pinakamurang lowering spring is R1. I think brand new set is around 6k.
i used to use this, sobrang stiff and tagtag, pero ang lufet sa cornering. hehehehe.

you have to pair this with gas shocks.

you can get this at some of the Banawe shops.

[richiegonzo]

it really depends how you like to be lowered, like how many finger gaps you like.

for starter..try purchasing lowering springs for your ride then try to see if the ride height suits you, if not try adding lifter until your satisfied with the height..

HTH

around 1.75" na gap between fender and tire sa harap and 2" gap sa likod. tanabe springs cost around 11k daw sa autocircuit. ok na ba yun?