i have the same sqeak sa leaf ko im not sure lang if they will void my warranty cause i have change my wheel to 275 70 16s na vovoid ba ung warrnty pag nag palit ng mags?
wala naman problema sa akin yun doc. sabi nga ni PK, "it's ok with me, you know". at least nga kung may picture may reminder, di ba sir tp.at kahit cheap din yung sasakyan, so classy naman the driver, you know.
kidding aside, thanks for the info sir TP. will try to go to case if they have that silencer...
Mga BOSBs,
FYI, according to JR of Diamond Valle, as of now vehicles for Periodic Maintenance Service will be by appointment only. Hirap daw if you bring your vehicle in without an appointment.
Hello BOSBs..
i need you help po regarding the PMS..
lapit 5K PMS ko... 4950 na yung reading ko po...
ano po suggestion nyo na good oil?.. i went last week to the case and they said na walang stock na oil pero pwede naman ako mag dala nang oil at dun sa kanila ipa change oil...
my other concern po is regarding the uneven height, i consulted it to them at the case and they said to me that it is really a default height for the strada to be uneven due to fuel tank positioning.. hindi ako maka lusot sa mga reasons out niya.. paano ba to??? should i leave it the uneven height of my strada?? i tried to explain to the mechanic of the casa that some of our members fixed there uneven height, pero hindi siya nag comment... deadma..
thanks in advance po mga BOSBs
howard
cebu
for the motor oil, madami BOSBs ang gumagamit ng Motul CRDI Specific (Fully Synthetic). ok naman ang performance.
for the uneven height, nagpapalusot lang yung SA mo. the default height should not be uneven with variance of +-10 mm (not sure about the figure though). try to look for apollo_kafka's scanned PMS, there might be an entry there that would show that the casa's here in Manila had resolved the problem. or try changing your SA and demand from the Service Manager there that another more knowledgeable SA be assigned to you
aba okay magpalusot yun ah!!!
i can understand the fact that the fuel tank on the left side adds more strain on teh leafs making it tilt on one side, pero dalhin mo sa kanya na kaunti ang laman ng tangke mo and tingnan mo kung ano nanaman yung idadahilan niya...
wala naman siguro manufacturer na maglalabas ng sasakyan na tabingi kasi diba.... some dealers would really do anything to save on teh cost of having to cover sold items under warranty, kasi parang sila din ang mag shoulder ng certain poercentage of the cost or something, or tamad lang talga sila gumawa or talgang wala lang alam yung SA.... oh well
Ganyan din palusot nung pina-check ko sa akin. Baka puede natin malaman from the BOSBS na na-correct ang uneven height kung saang casa pinagawa at kung sinong SA.
The day after my 30k PMS, I noticed na di masyado smooth ang pagpalit ng gears in the morning, especially yung 2nd gear. Pero for a few kilometers lang. Then ok na. Ang pinalitan lang naman ay yung gear oil. Wala naman ibang ginalaw. Naisip ko tuloy baka inferior na naman oil dito sa atin compared sa nilagay sa Thailand. Thanks.
Last edited by Boz; November 4th, 2009 at 09:58 AM.
BOSBs help naman...
sa mga nagpalit na ng SCV, paano napin point na doon ang problem? bukod sa bigla nawawalan ng power, palyado ba? palyado kasi ngayon MS ko 2.5. baka bukas dadalhin ko na sa service. hihingi muna sana ako ng advise sa inyo![]()
sir TP pag inapakan mo gas pedal ng konti diba aakyat sa 1k ang RPM then bigla babagsak sa 800 kahit nakaapak ka pa parang nasinok tapos noong monday paguwi ko napansin ko nung nasa garahe na naglalaro ang RPM pati tunog sa exhaust pipe iba, pabugabuga.. wala sila makita na problem sa computer eh...nilinis na ang fuel tank saka filter pero ganon pa din
last karga dito samin sa TOTAL pero ilang months na ko nagkakarga doon ayos naman. dati shell tapos nag petron. lahat sila present yung sinok. nakakainis lang palyado ngayon haha.
ipipilit ko nga na linisin o palitan ang SCV. kaya pala sinabi sakin ng mechanic sa service na ibalik mo ng ibalik dito para maayos baka itirik ka sa daan. duda ko nga alam na nila kung saan ang problem kaya sinabi nila yan pero bakit ayaw pa palitan dati? baka naman yan na susunod na step nila....