Results 621 to 630 of 684
-
Tsikoteer
- Join Date
- May 2007
- Posts
- 401
September 17th, 2017 05:50 PM #621Hello. Need your advice. Im in a quandary on whether to buy a second hand 2014 spin gas 1.5 a/t unit. Im just worried about the maintenance and availability of parts when in case a problem arises. But im seriously considering in. Hope to hear from anybody. Thanks
-
September 17th, 2017 08:27 PM #622
^^Matagal na wala ang spin dito sa market, around 2 years na ata if i'm not mistaken. The reason? It was overshadowed by its opponents when it comes to sales. What's more is that you dont get to see at least one of these plying the routes everyday. Maybe just rarely and with that, you know what it means. You've guessed it.
Btw, is this your 1st time purchasing a vehicle? If so, then i suggest you look for competing models of other brands instead. An avanza or mobilio is better because both toyota and honda have good aftersales support. However, if you dont want those two, then try to look at the ertiga, though i'm not sure abt. suzuki's aftersales... Good luck.
-
September 17th, 2017 08:43 PM #623
Bakit nga tinanggal sa market itong spin? When it was freshly launched marami naman ako nakita sa daan.
Sent from my SM-G930F using Tapatalk
-
Tsikoteer
- Join Date
- Mar 2008
- Posts
- 54,246
September 17th, 2017 08:45 PM #624
-
Tsikoteer
- Join Date
- May 2007
- Posts
- 401
September 17th, 2017 08:47 PM #625
-
September 17th, 2017 08:48 PM #626
Diba may bago din ang chevy, which is yung trax ata? Baka yun yung pumalit sa kanya kaso yung nissan juke at honda hrv ata katapat nun eh.
No problem. Read other threads of other models too and backread ka lang. You can learn additional information about them from reading it.
-
September 18th, 2017 10:56 AM #627
-
September 18th, 2017 10:57 AM #628
-
September 18th, 2017 12:14 PM #629
-
Tsikoteer
- Join Date
- Nov 2009
- Posts
- 3,509
November 22nd, 2017 12:26 AM #630Stay away from Chevy if you don't have experience on high cost and scarcity of parts.
Rad fan motor is making some noise and have to go to the usual dramas in claiming to TCCI. Stupid thing with the instrumentation is that it doesn't have temp gauge to warn from overheating.good thing I have scanguage to monitor water temp.
I recently stripped the stud bolt and have to source parts, found out tbz and colorado shares the same rear and front studs which is cheaper than buying the original part number for spin. I have yet to check the crosswind/mux stud if it does fit which is much cheaper.
So what's wrong with increased coolant concentration? The cooling capacity mostly comes from water,...
Coolant...