New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Results 1 to 13 of 13
  1. Join Date
    Oct 2002
    Posts
    2,719
    #1
    para dito?


  2. Join Date
    Oct 2002
    Posts
    29,354
    #2
    never seen a screw like that, much less the screwdriver that goes into it.

  3. Join Date
    Jun 2006
    Posts
    6,104
    #3
    Try using a flat precision screwdriver first (Stanley set of 6 yellow ones for 200 in mall hardwares).

  4. Join Date
    Jan 2005
    Posts
    1,417
    #4
    tawag diyan tri lock. used sa mc donnel douglas aircraft. for airbus aircraft locks like philips but alittle offset four lock, ang sa boeing using philips tip. ganyan ang nilagay ko sa plate number na screw ng nauso ang nakawan ng plate number.

  5. Join Date
    Oct 2002
    Posts
    3,144
    #5
    sa mga screw master... (tu soy?)

    be patient lang at nasa mood mga tindero

  6. Join Date
    Dec 2005
    Posts
    39,174
    #6


    Maybe OT: If this is just a plug and is connected to a cord, then just cut the cord and put in the regular plug that will fit your (electrical) wall socket....

    5303:burp:

  7. Join Date
    Jan 2005
    Posts
    1,417
    #7
    mods meron akong reply dito yesterday bakit nadelete? sorry nakita ko na after posting pero kanina ang nakalabas 3 post lang hangang kay horsepower lang, bakit ganoon?
    Last edited by raine; February 5th, 2008 at 09:23 AM.

  8. Join Date
    Jan 2005
    Posts
    1,417
    #8
    tried ko na open yan merong circuit yan sa loob with small transformer,

  9. Join Date
    Oct 2002
    Posts
    14,822
    #9
    Hmmm... para sa mga new nokia phone charger ba ito?

    I have an old (10 years?) screwdriver set for phones... I can open most fones with it pero walang ganyan sa set ko.

  10. Join Date
    Sep 2004
    Posts
    2,975
    #10
    Better siguro adaptor na lang ang bilhin mo, kesa screwdriver (unless you want to change the plug internals).

    1st time ko rin makakita ng ganung screw. Pero for sure, yung mga hardware shops sa Caloocan meron nyan

  11. Join Date
    Oct 2002
    Posts
    2,719
    #11
    finally got one from an electronic store ... smallest size lang available, dumudulas ... but i managed to unscrew and fixed the darn adapter ... broken cable lang ang problema but the break was just inside the rubber grommet ... if i simply cut the grommet and solder the broken conductor, it won't be as reliable as cutting the cable, resolder the ends to the pcb inside, and grommet goes to the bin

    thanks

  12. Join Date
    Aug 2005
    Posts
    7,186
    #12
    Designed ang screw na iyan na di nabubuksan kaya ganyan ang itsura.

    Di ba sa Singapore ang plug iyan?

  13. Join Date
    Oct 2002
    Posts
    2,719
    #13
    british standard ... so yes it is designed for all places that use the standard like singapore, a former british colony

    and yes it does look like it is designed for clockwise (for tightening) only but the correct screwdriver can still unscrew it with due care so as not to wear out the head as it tends to slip

Saan makabili ng screwdriver ...