Front bearing replacement?

[bogart]

Guys,

This is for my Gen1 Pajero, medyo umaalog yung left front tire ko. And pag mabagal ang takbo, ramdam ko yung "tug-tug" sound. Diagnosis ng isang mekaniko ay bearing daw.

Di lang nya kaya palitan yung bearing kasi my locking hub.

Paano na? Saan? At syempre magkano? (dagdag gastos na naman!)

Salamat!

[Ungas]

Bring it to MARC Caltex, chieffy knows how to deal with that matters. :D

I do have a complete kit for a Pajero but I think this is for the Gen II units. Afaik, there is no locking hub for the front end. Only rear axles have these kind of locks. Front bearings should be paired with bearings itself not locks.

[pajerokid]

AFAIK, the front bearings are not machine pressed so sa talyer lang, pwede nang palitan. antayin natin reply ni ser Alfred. mas kilala niya Gen1.

[bogart]

Originally posted by Ungas
Bring it to MARC Caltex, chieffy knows how to deal with that matters. :D
.....
Afaik, there is no locking hub for the front end. Only rear axles have these kind of locks. Front bearings should be paired with bearings itself not locks.

Ungas,

Di ba "locking hub" ang tawag dun sa sine-set sa LOCK or FREE?

Salamat sa quick replies nyo ha.

Paging Alfred! What say can you?

[OTEP]

Ungas ang bogart are talking about two different locks.

I think bogart's mechanic does not know how to deal with the manual freewheel hubs.

[bogart]

Originally posted by OTEP
Ungas ang bogart are talking about two different locks.

I think bogart's mechanic does not know how to deal with the manual freewheel hubs.

Ayun pala ang tamang term!!!

tama ka Doc Otep, mukha ngang di kaya ng mekaniko kung paano tanggalin at ikabit yun.

any suggestions? recommendations?

[OTEP]

bogart,

Just pick up some bearings from ungas and have Chieffy work on them.

[Ungas]

Hahaha! Paging Mars to Earth do you copy?

Madali lang yan free wheeling hubs, basta alam nung gumagawa at magbabaklas kung pano tinanggal. Alam ko madalas baklasin yan dati ni afrasay sa Pajero nya dati. :D

[pajerokid]

ay saus! yun lang palang lock! akala ko naman parang yung lock sa rear!

[bogart]

san naba si Sir Afrasay??

alam ko mamaya pa tong 10pm onwards eh.

abangan bukas kung anong reply nya.

[NightRock]

Mamaya pa mag online si Sir Alfred night duty sya.. our Gen1 specialist

[afrasay]

dali lang palitan ang front bearings ng gen1. may inner and outer bearings. si ferdie ang nagpapalit nun sa akin. sa caloocan or kay ungas ka bumili. yun locking hub maalis ng buo. yun akin kasi auto hubs kaya may ring lock lang yun cv joint. for details call ninyo na lang si ferdie - 02-3603268

[OTEP]

Ginawa na ang bearing ni bogart kanina. Ok kaya ang resulta? Abangan...

[afrasay]

sana ok na para suave...

[bogart]

Ayos na!

Swabe na ang takbo, wala nakong maramdamang alog.

Di lang pala bearing ang may problema, pati yung mismong hub (kung saan nakakabit yung bearing) maluwag na.

So it was a choice of rebuilding (1.5k) or buying brand new (5k).
I chose wisely. ;)

Na- lecturan nga ako ni Otep, dapat pala kasama sa regular maintenance ang re-packing ng front bearings natin. Advise ko, pa-repack nyo na rin yan!

Buti na lang dumating si Ungas with his bulitas, errr, bearings.

Sarap magpa-ayos kina chieffy, may libreng sandwich, pop & pansit.

Maraming Salamats to Otep, Pajerokid, Chieffy & our driver Ungas for accompanying me to El Dorado.

Ungas, ang sarap sumakay sa "pajero" mo ah, ang lapad at ang taas! :D

Dag-dag gastos na naman.... grrrrrrrr.......
:mad:

[Ungas]

There goes that "Pajero" brand again... hahaha!

Sana nawa'y pwede nyo na isama yan sa mga offroading escapades natin sa mga susunod na lakad.

[OTEP]

Si bogart pwede nang ipalit kay Rex Navarette. Hehehehe. Nakakatawa siya. Mr. Suave talaga!