Turbo Charger Facts

[Doc Diesel]

Again, help yourselves with the info.

http://betancalibration.com/pdf/TurboFacts.PDF

Doc Diesel

[wildthing]

Bossing,

Nag tuturbo charge ba kayo ng non-turbo charged engine? I'm looking into the possibility of turbo charging a 2.7L nissan diesel engine ng frontier.

[Doc Diesel]

Bossing,

Nag tuturbo charge ba kayo ng non-turbo charged engine? I'm looking into the possibility of turbo charging a 2.7L nissan diesel engine ng frontier.

I'm sorry but we don't do that, yet. Hopefully in the future though. I would consult 1st an expert nissan mechanic before carrying out on your plans.

Doc Diesel

[RS Sprint]

I met someone who has an A/T Nissan Frontier. Walang turbo sa makina so he ordered a bolt-on turbo kit for his engine from Japan. Tulin! Habol niya kasi yung A/T ng Frontier.

So yes, kahit anong makina pwede i-turbo, gas o diesel. Hindi lang pare-pareho ang gains.

[splerdu]

very informative! thanks.

[20vanda01]

Doc Diesel, yong low charged turbo ba ng crosswind, p'wede bang lagyan ng intercooler? how much is an intercooler at san nakakabili para sa crosswind?

[RS Sprint]

You can buy an i/c/ surplus from Banawe. Then have someone do your pipings. Dapat from the intake side of the turbo reroute mo yung piping to an i/c then back to the intake plenum / manifold.

Well, sa mga gas powered cars ganito ginagawa namin! :D

[20vanda01]

RSSprint, may idea ka ba kung magkano ang intercooler? May preferred brand ba nito? San kaya p'wede pagawa, by the way kung idadagdag ko ang intercooler sa engine ko, mawawala ba warranty ng engine ko from isuzu) 4 months pa lang ride ko.

Salamat.

[tebs]

pag gusto mo ng intercooler from surplus, maybe i can help you.

[OTEP]

Si Auto_Xer gumagawa ng intercooler.

Sa shop ni Ben sa Banawe (INTENSE), nakakita ako ng intercooler. Pero audio shop sila so I don't think they will do an install.

[RS Sprint]

20vanda01,

You can buy a surplus Galant VR-4 intercooler sa CINCO or Autobuff in Banawe, I think around 4,500-6,000 ang price range nito, depending on who you ask and how much they know you. ;)

For the install and piping, ideally you get mandrel bent tubes. I know someone who can make your piping. Maganda mga gawa niya, he has pre-cast mandrel bends so malinis tingnan and more importantly maganda ang flow ng hangin sa loob ng pipes.

I think baka nga ma-void ang warranty mo though kung ikakabit mo i/c at pipings.

OTEP,

Auto-Xer is a friend, pro we don't find his i/c's to be very nice, since he uses the basic design / structure of the radiators which he manufactres. They are quite similar, pero may mga small differences. Best get a surplus intercooler.