fender flares

**aleckskie** · October 17th, 2003 02:56 PM

mga tol, san kaya meron? magkano? pwede ba pagawa na lang yari sa fiber glass?

Surf 1990 2lte-matic

salamat!

**Ungas** · October 17th, 2003 03:24 PM

Pwedeng gawa sa fiberglass, kaso pag nasabit ito sira agad. Mahina ang flexibilty ng yaring local. If you want there are some fender liners that are rubber made. But I think wiretep_md had his rubbers from Bacolod.

**aleckskie** · October 17th, 2003 03:43 PM

ganon ba, madali palang masira yon.

i'm planning kasi to change tires, from 235/75/R15 to 31/10.5/R15 or 32/11.5/R15, eh mag i-stick out

wala na bang ibang (cheaper) alternative

no sa palagay nyo mga gurus?

**Ungas** · October 17th, 2003 03:48 PM

I was going to advise you to check TJM products but since you opted for a cheaper alternative, those rubber outer fender liners will do.

Let's wait for hybrid's reply, he also have a Surf unit for his daily route jobs.

**OTEP** · October 17th, 2003 04:54 PM

Your best bet would be to get OEM surplus flares. Plastic flexes, fiberglass cracks.

Although I think mauler has had some sucess in using glass fibre on his Bighorn's flares.

**aleckskie** · October 17th, 2003 06:23 PM

Sir Ungas,

bushwacker nga sana kaso ang mahal 200-300 USD plus tax, IMO di talaga practical, tapos pag nasira d naman pwedeng bumili ng isa kailangan set of 2.

Sir Otep,

saan kaya meron OEM surplus, eto hirap pag SUVic ang unit, hirap humanap ng accessories hehehe

**boybi** · October 17th, 2003 07:14 PM

try mo sa capalangan

**aleckskie** · October 17th, 2003 07:26 PM

tanong na medyo may katangahan:

Ser boybi,

san po yung capalangan?

**boybi** · October 17th, 2003 07:31 PM

sa pampanga, dami dun mga na chop-chop na parts ng iba't-ibang sasakyan.

**OTEP** · October 17th, 2003 07:42 PM

KimpOy is the kingpin of Capalangan.

**NightRock** · October 18th, 2003 01:27 AM

saan lugar ba sa Pampanga yang capalangan??? yun ba yung road going to Clark??? sakop ba ng DAU yon.. may na daanan kasi akong place don along the highway na daming chop chop na tinda...

**boybi** · October 18th, 2003 08:51 AM

capalangan is in the apalit area

**kimpOy** · October 18th, 2003 08:54 AM

hindi naman ako kingpin dun he..he
nandun lang ako sa area kapag thursday,

saka napansin ko puro commercial sedan parts ang karamihan.

**Rediesel** · October 18th, 2003 11:07 AM

ano yung rubber fender flares, as in gawa talaga sa rubber, o oversized rubber mudguards lang siya.

**Ungas** · October 18th, 2003 11:26 AM

The rubber flares are really made for protecting the side paint jobs. It has channels for water to flow to instead of trapping it inside the fenders.

**NightRock** · October 18th, 2003 07:54 PM

Rubber flares may makita kaya ako sa banawe nito??

**OTEP** · October 18th, 2003 09:01 PM

Rubber flares are sold by Freeman of Armark 4x4.

**NightRock** · October 18th, 2003 09:05 PM

ahh Ok that's better tailor made ba yon sa specific model or .. made to order lang

**OTEP** · October 18th, 2003 09:07 PM

I think it's 'cut to fit'. TJM din ang may gawa. I think wiretap_md has pictures of them.

**NightRock** · October 18th, 2003 09:30 PM

Thanks doc OTEP.. mas ok pag ganon.. tawagan ko nalang si Freeman pag dating ko dyan

The Largest Car Forum in the Philippines

fender flares

Thread Tools

Search Thread

Display