mitsubishi RVR parts

[jeegoogs]

mga sirs,

san ba available ang parts ng Mitsubishi RVR 4D68 engine d2 sa manila? I have this unit now.kailangan ko kasi malaman un auto parts supply para sa mga maitenance nito in the near future.balita ko kc mahirap hanapin ang parts ng RVR d2 sa atin.

thank you in advance

[phat_tricks]

pede po kayo magtanong sa el dorado sa sm megamall...authorized dealer sila mitsu parts

[pitbullz]

ang RVR ata medyo hirap sa pyesa? paano kaya sa body parts?

[alwayz_yummy]

body parts are now abundant...thanxz to the chop-chops in banawe,evangelista,etc...even parts of our local space wagon can fit in the rvr(1990-97 models only, excluding my avatar)

may mabibili sigurong parts for th 4d68..un lang eto masasabi ko sayu, dont go sa eldorado, wala sila nyan at ang stocks nila is for locally available units...

dito ako bumimili sa banawe: motorix ang name...original mitsubishi parts dealer ito, pati imported na sasakyan may parts sila..alam ko isa sa prob ang timing belt ng 4d68, mahirap hanapin, ibang sukat nyan compared to 4d56...pero pag punta ka dun, dalhin mo ung parts na kelangan mo..kasi as the same,kahit sa locally available na sasakyan, mas ok maghanap kung may sample, diba?

eto totoo, noong nabili ko delica noon halos wala ko mahanap na piyesa kung walang sample, kahit union motors di nasolve ung prob ko, mahal pa maningil kahit walang warranty gawa nila! si "manong" lang dito malapit sa amin nakasolve..mura pa..ngayon, marami nang delica(eto 1 of my reason kung bakit gusto ko na ibenta,e..), wala nang problem sa parts...at alam na gawin ng neighborhood mekaniko mo.

tip ko sayu, wag ka na pumunta sa casa, wala naman sila matutulong sayu, ooferan kapa nila ng kotse nila...

[jeegoogs]

body parts are now abundant...thanxz to the chop-chops in banawe,evangelista,etc...even parts of our local space wagon can fit in the rvr(1990-97 models only, excluding my avatar)

may mabibili sigurong parts for th 4d68..un lang eto masasabi ko sayu, dont go sa eldorado, wala sila nyan at ang stocks nila is for locally available units...

dito ako bumimili sa banawe: motorix ang name...original mitsubishi parts dealer ito, pati imported na sasakyan may parts sila..alam ko isa sa prob ang timing belt ng 4d68, mahirap hanapin, ibang sukat nyan compared to 4d56...pero pag punta ka dun, dalhin mo ung parts na kelangan mo..kasi as the same,kahit sa locally available na sasakyan, mas ok maghanap kung may sample, diba?

eto totoo, noong nabili ko delica noon halos wala ko mahanap na piyesa kung walang sample, kahit union motors di nasolve ung prob ko, mahal pa maningil kahit walang warranty gawa nila! si "manong" lang dito malapit sa amin nakasolve..mura pa..ngayon, marami nang delica(eto 1 of my reason kung bakit gusto ko na ibenta,e..), wala nang problem sa parts...at alam na gawin ng neighborhood mekaniko mo.

tip ko sayu, wag ka na pumunta sa casa, wala naman sila matutulong sayu, ooferan kapa nila ng kotse nila...

A.yummy,
san ba banda ang motiorix?

[jeegoogs]

pede po kayo magtanong sa el dorado sa sm megamall...authorized dealer sila mitsu parts

limited lang kasi un parts ng rvr sa eldorado.

[alwayz_yummy]

in banawe.. from e.rodriguez ave(ung galing sa PCSO) right to banawe.(if im still right) pangalawang kanto from e.rodriguez, right side,exactong sa kanto sila, bago dumating ng hospital(forgot the name, parang "something-childrens hospital" may malaking signage sila, may talyer din sa likod sila. basta slow ka nalang pagkaright mo sa banawe..kalimitan may nakapark sa harapan nila.

[espeago]

Mitsubishi RVR 4d68 din car ko. so far wala naman problem. Tnx sa info alwayz yummy.

[jeegoogs]

in banawe.. from e.rodriguez ave(ung galing sa PCSO) right to banawe.(if im still right) pangalawang kanto from e.rodriguez, right side,exactong sa kanto sila, bago dumating ng hospital(forgot the name, parang "something-childrens hospital" may malaking signage sila, may talyer din sa likod sila. basta slow ka nalang pagkaright mo sa banawe..kalimitan may nakapark sa harapan nila.

Thanks a yummy,

[alwayz_yummy]

welcome...teka, eto pala complete address and phone nila:-->kita ko kasi old reciepts ko,e..pm ko syu..

[jeegoogs]

welcome...teka, eto pala complete address and phone nila:-->kita ko kasi old reciepts ko,e..pm ko syu..

Ok thank u for the details.tawagan ko nalang muna kasi balak ko mag palit ng T-belt and ATF filter later.

thnks again,

[OTEP]

Madami namang parts sa Banawe. Mas maigi if you have a sample. Ganun kasi yung nakasabay kong RVR sa Banawe, sandali lang bumalik na agad yung runner ng talyer may parts na.

[alwayz_yummy]

dont worry, i think they have a copy of the repair manual for rvr....like nung sa delica ko, ang nilabas nila ung repair manual ng delica 4wd(in english), and not the local L300 we have here.

[jeegoogs]

Madami namang parts sa Banawe. Mas maigi if you have a sample. Ganun kasi yung nakasabay kong RVR sa Banawe, sandali lang bumalik na agad yung runner ng talyer may parts na.

Thanks otep.

[jeegoogs]

dont worry, i think they have a copy of the repair manual for rvr....like nung sa delica ko, ang nilabas nila ung repair manual ng delica 4wd(in english), and not the local L300 we have here.

thanks a.yummy.....so may peace of mind na ako sa availabilty ng rvr parts.PM nalang kita later ....thanks once more.

[cssmd]

Share my experiences with my 1993 RVR Sportsgear A/T Turbodiesel 4d68. Had my timing belts replaced at 103TKms, bought at Mits Parts in Banawe for 3500k (includes timing belts A&B, overhaul gasket set). Labor cost 1500k for half day of work. Very timely as the old ones have small cracks on it. Downloaded owners manual at www.mitsubishi-forums.com (Sportsrunner in europe). Test drived it to Subic, very stable (full-time 4WD) and reach easily at 120kph at NLEX, my average speed, max at 140kph. Reached San Fernando at 30mins. Fuel expense approximately at 500k back & forth (P24/L diesel).

[adamsapple]

Share my experiences with my 1993 RVR Sportsgear A/T Turbodiesel 4d68. Had my timing belts replaced at 103TKms, bought at Mits Parts in Banawe for 3500k (includes timing belts A&B, overhaul gasket set). Labor cost 1500k for half day of work. Very timely as the old ones have small cracks on it. Downloaded owners manual at www.mitsubishi-forums.com (Sportsrunner in europe). Test drived it to Subic, very stable (full-time 4WD) and reach easily at 120kph at NLEX, my average speed, max at 140kph. Reached San Fernando at 30mins. Fuel expense approximately at 500k back & forth (P24/L diesel).

Brod, pwede bang malaman ang contact # address ng mekaniko mo mukhang magaling gumawa.thank you

[cssmd]

Brod, pwede bang malaman ang contact # address ng mekaniko mo mukhang magaling gumawa.thank you

Vision Motor along West Ave, QC 4100322

[cssmd]

Vision Motor along West Ave, QC 4100322

Also my RVR is well kept & well maintained. I have an owners/repair manual as my reference and years of experience using old cars-1976 Toyota corona & 1983 mitsubishi lancer since my high school & college years.