Polyurethane Bushing or OEM Bushing??

[kooldud]

Magandang araw!

Survey lang ako kung ano mas maganda for bushings.. polyurethane or OEM?
Any input from the gurus or those who had experiences in both types of bushing? Plan ko kasi papalitan un mga bushing ng auto ko, medyo makalampag eh.. thanks!!!

[non-vtec]

haven't tried pero afaik, polyurethane bushings are hard. better for performance oriented driving. san ba nkakabili nito?

[shadow]

OEM siyempre hinde namana mahala ng mga bushing kahit sa casa ka pa bumili..

[disturbed]

depende sa application mo papi..no need for polyurethane bushings if you will drive your car daily..and by your statement na makalampag..meaning sa suspension and pangilalim gagamitin ito..replacing them with this kind of bushings will be a firmer ride..mas matigas normally ang effect nito..some of them will squeak pag nde na apply ng magandang grease...better stick to your oem kasi pricey din ang mga poly bushings...

[kooldud]

non-vtec, meron daw ata sa Cruven (havent check myself though)..

baka kasi magpagawa ako dun sometime, e since nagoffer ata sila ng poly, baka un ang ikabit..so do you guys think for daily driving purposes, mas ok ang OEM? sabagay, mas stiff nga siguro polys.. sige, baka nga OEM na lang pakabit ko.. kung meron sila..hehe

[noc_manila]

I use poly before sa van ko, sobra tagtag parang PUJ Jeep, ayun doble gastos ako kase pinapalitan ko din ng OEM ...

[kooldud]

salamat sa input! sige, OEM na lang pakabit ko..dapat sana this weekend pero since darating si mina, baka next week na lang..hehe

[speedyfix]

go oem if it is a stock car. or even if it modified and you have no plans to race it then stick with oem.

[vinj]

Go OEM unless you plan to get some serious track time. Polyurethane bushings also need to be lubricated at times (some can get noisy).